THE GOVERNMENT OF MOSCOW

Moscow City Committee on Pricing Policy in Construction
and state examination of projects

METHODOLOGY
calculating the cost of scientific,
normative and methodological, design
and other types of work (services),
carried out with the attraction of funds
budget of the city of Moscow
(based on standardized labor costs)

MRR-3.2.67.02-13

“Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was developed by specialists of the State Budgetary Institution "NIAC" (S.A. Kopbaev, E.A. Igoshin, A.V. Minaeva) based on the state assignment of the Moscow City Committee on pricing policy in construction and state examination of projects.

“Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" was approved and put into effect by order of the Moscow City Committee on pricing policy in construction and state examination of projects dated July 4, 2014 No. 60.

The “Methodology” was put into effect to replace Appendix 2 to MRR-3.2.06.07-10.

INTRODUCTION

This “Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) carried out using funds from the budget of the city of Moscow (based on standardized labor costs). MRR-3.2.67.02-13" (hereinafter referred to as the "Methodology") is intended to determine the initial (maximum) price of work (services), as well as to determine the cost of contract and subcontract work (services), for which there are no regulatory and methodological documents on pricing .

Such work includes certain types of design work and urban design and territorial planning work, research work, development of normative and methodological documentation, etc.

A distinctive feature of these works is the absence of a functional dependence of the complexity of their implementation with in kind, used in calculating the cost of most types of design work (m, m 2, m 3, pcs., etc.).

When developing the Methodology, the following regulatory and methodological documents were used:

- “Collection of basic prices for design work for construction carried out with the involvement of funds from the budget of the city of Moscow. МРР-3.2.06.07-10 ".

1. GENERAL PROVISIONS

1.1. This “Methodology” is an integral part of the norms and regulations in the design and construction complex of Moscow.

1.2. The main types of work (services), for which base prices are calculated on the basis of standardized labor costs in accordance with this “Methodology,” include:

Design work for which there are no regulatory and methodological documents on pricing in design, or the cost of which, in accordance with the “Collection of basic prices for design work for construction, carried out with the involvement of funds from the budget of the city of Moscow,” is recommended to be determined by standardized labor costs;

Development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

Development of research and normative-methodological documentation;

Conducting marketing research.

1.3. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour work week (Articles 91, 100 of the Labor Code of the Russian Federation).

1.4. Basic prices calculated on the basis of the “Methodology” take into account the following expenses:

For remuneration of all participants in the work performed;

Contributions to state social and health insurance;

Depreciation charges for the complete restoration of fixed production assets and expenses for all types of their repairs;

Rent;

Taxes and fees established by law (except VAT);

Profit.

1.5. The following associated costs are not included in the base prices and are subject to compensation by the customer:

Costs for the acquisition of standard documentation for buildings and industrial products intended for the design of facilities;

Travel and transportation costs associated with the design of an object outside the location of the design organization;

Expenses for international and long-distance telephone conversations, international and long-distance postal and telegraph mail related to design;

Expenses for paying bills of approval and examination organizations for work performed in accordance with the established procedure or on behalf of the customer in the event that these services are not included in the list of documents issued to applicants without charging a fee;

Scientific and technical support of objects;

Expenses for payment of services of organizations for translation from foreign and into foreign languages ​​of design and reference and methodological documentation;

Costs for the production of additional copies of design documentation in addition to the mandatory four copies;

Expenses for paying bills of organizations providing data on traffic flows, climatic conditions and background concentrations of pollutants;

Value added tax.

1.6. Basic prices for work are calculated on the basis of this “Methodology” as of 01/01/2000.

1.7. Bringing the base price to the current level is carried out using a conversion factor for the base cost of design work ( TO per) to the current price level, approved in accordance with the established procedure.

1.8. When determining the cost of work on the basis of base prices calculated according to this “Methodology”, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the normative ones (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values ​​of which are given in the “Collection of basic prices for design work for the construction of facilities carried out with the involvement of funds from the budget of the city of Moscow. МРР-3.2.06.08-13", table 4.2.1.

2. METHOD OF CALCULATING THE COST OF WORK

2.1. The cost of performing work is calculated based on base prices. Basic prices are calculated based on standardized labor costs, using the formula:

Average salary as of 01/01/2000; (accepted 9590 rub./month);

R - level of profitability (accepted R = 10 %);

TO h- coefficient taking into account the share of wages in the cost ( TO h 0.4 is accepted).

2.3. A coefficient that takes into account the level of qualifications (participation) of performers in the development ( TO kv(uch)), calculated by the formula:

AND i- index of average monthly wages of direct performers;

H i- number of performers in groups with the same salary level;

T f i- actual working time of performers with the same salary level.

Taking into account basic values Salary , R And TO h and using the formula, the average monthly unit (one worker) output for the work performed is calculated:

2.4. The standard duration of work is determined by the formula:

Where WITH b- development cost in prices as of 01/01/2000.

Table 2.1

Notes:

1. The values ​​given in the table are not mandatory for calculations, but are intended for a preliminary assessment of the number of participants in the work.

2. With intermediate and missing values ​​of the number of employees ( H P), the duration of work is determined by interpolation and extrapolation methods.

2.5. The cost of performing work at current prices is calculated on the basis of base prices using the formula:

WITH shopping center- cost of work in current prices;

C b(2000)- base price of work at the price level as of 01/01/2000;

TO lane- coefficient for converting the base cost of design work into the current price level. Magnitude TO lane approved in accordance with the established procedure.

Table 2.2

Indices of the average monthly salary of direct executors (developers)

THE GOVERNMENT OF MOSCOW

Moscow City Committee on Pricing Policy in Construction

and state examination of projects

ADDITIONAL AND RELATED WORK

Collection 9.1

COST CALCULATION METHOD

SCIENTIFIC, NORMATIVE AND METHODOLOGICAL,

DESIGN AND OTHER TYPES OF WORK (SERVICES)

BASED ON STANDARDED LABOR COSTS

МРР-9.1-16

Collection 9.1 “Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) based on standardized labor costs. MRR-9.1-16" (hereinafter referred to as the Collection) was developed by specialists of the State Institution "NIAC" (S.V. Lakhaev, E.A. Igoshin, A.V. Minaeva).

The collection was approved and put into effect on January 9, 2017 by order of the Moscow City Committee on pricing policy in construction and state examination of projects dated December 29, 2016 No. MKE-OD/16-75.

The collection is an integral part of the United regulatory framework MRR.

The collection was developed to replace MRR-3.2.67.02-13.

Introduction

1. General Provisions

2. Methodology for calculating the cost of work

Application

Examples of calculations

INTRODUCTION

This Collection 9.1 “Methodology for calculating the cost of scientific, normative, methodological, design and other types of work (services) based on standardized labor costs. МРР-9.1-16" (hereinafter referred to as the Methodology) was developed in accordance with the state assignment.

This Methodology is intended for use by government customers, design and other interested organizations when calculating the initial (maximum) prices of contracts and determining the cost of scientific, normative, methodological, design and other types of work (services) carried out with the involvement of funds from the budget of the city of Moscow and for which there are no regulatory and methodological documents on pricing.

When developing the Methodology, the following regulatory and methodological documents were used:

Civil Code of the Russian Federation;

Collection 1.1 “General guidelines for the application of Moscow regional recommendations. MRR-1.1-16".

1. GENERAL PROVISIONS

1.1. This Methodology is an integral part of the Unified regulatory framework of the MRR.

1.2. When determining the cost of work based on this Methodology, one should also be guided by the provisions of collection 1. 1 “General guidelines for the application of Moscow regional recommendations. MRR-1.1-16".

1.3. Bringing the base cost of work determined in accordance with this Methodology to the current price level is carried out by applying a conversion factor (inflationary change), approved in the prescribed manner.

1.4. The main types of work (services), the cost of which is calculated on the basis of standardized labor costs in accordance with this Methodology, include:

Design work and urban planning work for which there are no regulatory and methodological documents on pricing in design, or the cost of which is in accordance with the “General Guidelines for the Application of Moscow Regional Recommendations. MRR-1.1-16" and other collections of MRR are recommended to be determined by standardized labor costs;

Development of urban planning documentation and territorial planning documents, for determining the cost of development of which there are no regulatory and methodological documents;

Development of research and normative-methodological documentation;

Conducting marketing research.

1.5. To calculate the base price, standardized labor costs are accepted for a five-day, two-day-off, 40-hour work week (Articles 91, 100 of the Labor Code of the Russian Federation).

1.6. Basic prices calculated on the basis of the Methodology take into account the costs listed in paragraph 3.3 of MRR-1.1-16.

1.7. Basic prices calculated on the basis of the Methodology do not take into account the associated costs listed in paragraph 3.6 of the MRR-1.1-16.

1.8. When determining the cost of work based on base prices calculated according to this Methodology, coefficients that take into account complicating (simplifying) factors for performing work are not applied.

1.9. Reducing the time frame for completing work relative to the standard (if such a requirement is formalized in the prescribed manner) is taken into account by using correction factors, the values ​​of which are given in Table 4.1 MRR-1.1-16.

2. METHOD OF CALCULATING THE COST OF WORK

2.1. The cost of performing work is calculated based on base prices. Basic prices are calculated based on standardized labor costs, using the formula:

C b- base price of work;

On Wednesday- average output;

T p- planned duration of work;

Ch p- number of performers;

K kv(uch)- coefficient that takes into account the level of qualification (participation) of performers in the development.

2.2. Average monthly output On Wednesday calculated by the formula:

Salary Wed- average salary ( Salary Wed accepted 9590 rub./month);

R- level of profitability (accepted R = 10%);

K z- coefficient taking into account the share of wages in the cost ( K z 0.4 is accepted).

2.3. A coefficient that takes into account the level of qualifications (participation) of performers in the development ( K kv(uch)), calculated by the formula:

And i- index of average monthly wages of direct performers;

Hi- number of performers in groups with the same salary level;

T fi- actual working time of performers with the same salary level.

Taking into account basic values Salary, R And K z and using formula 2.2, the average monthly unit (one worker) output for the work performed is calculated:

2.4. The standard duration of work is determined by the formula:

Where C b- development cost.

Table 2.1

Notes:

1. The values ​​given in the table are not mandatory for calculations, but are intended for a preliminary assessment of the number of participants in the work.

2. With intermediate and missing values ​​of the number of employees ( Ch p), the duration of work is determined by interpolation and extrapolation methods.

Table 2.2

Indices of the average monthly salary of direct executors (developers)

APPLICATION

Table 1

An example of calculating the qualification (participation) coefficient of performers participating in the performance of work (services)

table 2

Example of calculating the base price of work (services)

The cost of work (services) performed in current prices is determined by formula (4.1) of the “General guidelines for the application of Moscow regional recommendations. MRR-1.1-16" and amounts to:

S tc = C b x K lane = 212942 x 3.533 = 752324.1 rub.,

where K per =3.533 is the conversion factor (inflationary change) to the base cost of urban planning and design work in the fourth quarter of 2016 to prices in 2000 (according to the order of Moskomekspertiza dated January 21, 2016 No. MKE-OD/16-1).

The most important stage of the project is the preparation and subsequent completion of the estimate. This is done at the final stage of preparation for its implementation. Based on the prepared financial document, a calendar plan implementation of the initiative, delivery schedules necessary materials and equipment. Let's look further at examples of estimates and how to draw them up correctly.

Download examples

The estimate is a financial document that includes the prices of all work performed and necessary tools and materials. In addition, overhead costs are always included in it (about 15% of total amount), unexpected costs (2%) and profit of the contractor (10-15%).

Basic principles of budgeting

Usually the organization that will carry out the work handles the calculations. She must coordinate all her actions with the customer. The more detailed all processes and materials are described (down to the number and brand of screws), the better. However, often in practice a simplified version is used, where only the main types of work, units of measurement, quantities, prices and costs of processes are indicated.

An example of an estimate for renovation work on a room in an apartment in a simplified version:

This sample estimate is applicable for making calculations for small-scale projects, and the entered data, if necessary, can easily be adjusted by agreement with the customer. It is not described here exactly how many bags of putty or cans of paint are required to complete necessary work. The parties agree on the price per unit of measurement and the total cost, and the details (purchase of materials, transportation costs, removal of construction waste) are borne by the contractor.

Let's look at an example of an estimate compiled using a different method. In this case, all the necessary resources to complete the work at each stage are outlined.

At the request of the customer, an estimator or contractor can prepare several versions of estimates, taking into account various components (brand, price and quantity of materials, scope of work, quantity and technical indicators of equipment used, number of workers).

In what form are estimate documents drawn up?

For various types work, different forms of drawing up financial documents are used. Let us pay attention to an example of an estimate for design and survey work (design- survey work), which is compiled in accordance with form 3p. It is an annex to the contract between the parties, the cost here is determined by labor costs. Form 3p estimate is used to calculate the cost of research, design, environmental engineering, engineering and survey work.

Often such estimates consist of two tables. In the first, the level of labor costs is determined, and in the second, the cost of the work performed is calculated. The cost of work is proportional to the time spent on all processes and the remuneration of designers. The second table may also include other costs, such as depreciation, freight and travel costs, and material costs.

For construction work Other forms of estimates are provided:

• Local is preparing for separate species of the work performed, it takes into account the costs of individual sections of construction or repair work.
• Object is formed within one object, combining everything local estimates and their calculations related to this object. Its adjustment is made based on the data from the working documentation.
• The summary estimate is based on site estimates and characterizes the total final cost of constructing a structure or building.

If it is not possible to draw up an accurate estimate due to the fact that there is no complete clarity on the specification of the materials used or changes will still be made to the project, then local and site-specific estimates can be drawn up. Also often used are estimates drawn up in the form KS-2 (act of acceptance of work performed) and KS-3 (certificate of costs and value of work performed).

From non-profit organizations, including budgetary ones, legislation requires the annual preparation of estimates of income and expenses.

Computer programs for financial calculations

Nowadays, many have been developed software products, with which you can draw up various financial documents. With a certain degree of convention, they can be divided into two groups:

• Free. They can be freely found on the Internet, on thematic sites. Such programs have minimal functionality, allow you to perform the simplest calculations and do not have the function of updating regulatory frameworks.
• Professional. They are used by specialists and require the purchase of a software and service product. The most popular and functional are “Smeta.ru”, “GRAND Smeta”, “1C: Contractor”, “Turbosmeta”, etc.

However, in the familiar Microsoft Excel program, you can also easily create an estimate template for the implementation of the required project.

To fill out the estimate, just insert the necessary indicators into the created form, all calculations will be carried out automatically.

If the project requires a large amount of various work and significant investments, then you should not undertake such serious calculations yourself without special knowledge. It is better to contact specialists who know modern technologies production and the current situation on the building materials market. They will be able to give an objective picture of the expected costs and offer options for its possible optimization. By saving on the services of an estimator, you can lose more and not realize your plan at all.

home » Earn money online » Calculation of feast based on labor costs. Determination of the cost of design and survey work. PIR estimates. In what form are estimate documents drawn up?