How to get automatic settings. How to get automatic Internet settings from MTS on Android. How to set up mobile Internet on Beeline? A number to send or send phone settings to receive mms and sms on a beeline phone. Possible

All Tele2 subscribers, purchasing a new SIM card, can use the Internet, receive or send SMS and MMS without setting up their phone. WAP/MMS/Internet services are connected to all subscribers free of charge.

How to get automatic Internet settings from Tele2?

You can order free automatic settings necessary for the correct operation of WAP/MMS/Internet services for most models of mobile devices that support GPRS / EDGE technologies. To do this, just call the toll-free number 679 .

Is it possible to configure the Internet manually?

Yes it is possible. Below are typical GPRS/MMS/JAVA/WAP settings for most modern phones/smartphones/tablets.

Internet GPRS settings.

MMS settings.

After manually setting up your phone, be sure to send a test MMS message to any recipient (for example, yourself). This is necessary to register you in the Tele2 network as a user MMS services. Otherwise, instead of incoming MMS messages, you will receive a link to the MMS Gallery, where all MMS messages sent to you will be posted.

JAVA settings.

In order to be able to use Java applications that require Internet access (such as Opera mini or Jimm), some phones require setting up a Java profile.

WAP settings.

In order to be able to view WAP pages and access the Internet directly from your mobile device, you need to make the following settings.

What is the cost of mobile Internet from Tele2?

There is no point in publishing tariffs here because... they change periodically. One thing is for sure: WAP and GPRS are charged differently. Find out more on the company's website.

How to configure a smartphone/tablet based on Android, iOS (iPad, iPhone) or other OS to access the Internet?

Settings → Wireless networks → Mobile network → Access points (APN).

Settings → General → Network → Cellular data network.

Enter the following:

APN: internet.tele2.ru
Username:[not required]
Password:[not required]

GPRS access via cell phones for computers, laptops, PDAs, etc.

Before you start setting up your personal computer, make sure that your phone:
1. Supports GPRS/EDGE technologies. This information can be found in the user manual or on the website of the mobile device manufacturer.
2. Configured to work with WAP/MMS/Internet services.

Necessary equipment.

In addition to a phone that supports one of the GPRS/EDGE technologies and is configured to work with WAP/MMS/Internet services, you will need a personal computer, laptop or PDA. In addition, you may need a cable to connect your phone to your computer.

Connecting your phone to your computer.

There are 3 ways to do this.

Method 1: Using a cable for a COM or USB port.
If such a cable was not included with your mobile phone, you can purchase it at a mobile phone and accessories store. When choosing a cable, make sure that it is suitable for connecting your phone model to a computer, and that the cable supports data transfer (some cables are intended only for data synchronization, that is, editing the phone book, downloading and editing pictures and ringtones, and etc.).

Method 2: Connect via infrared port (IR port).
In this case, your mobile phone and the computer must be equipped with infrared ports.

Method 3: Connect via Bluetooth. In this case, your mobile phone and computer must be equipped with a Bluetooth receiver and transmitter.

Setting up your phone as a modem.

After connecting the phone to the computer, you will need to set the phone as a modem. To do this, you will need drivers, which in most cases can be found on the CD included with the phone. If there is no such CD, the necessary programs may be on the website of your phone manufacturer.

Setting up a modem phone.

After installation and configuration software Find the modem installed by the operating system (the name of the phone connected to the PC) and, by right-clicking on its image, select “Properties” from the pop-up menu. Or open the “Control Panel”, select “Phone and Modem”, and in the window that opens, select the “Modems” tab, indicate the installed modem and click “Properties”.

In the modem properties window, select the “Advanced communication parameters” tab and enter an additional initialization command with the name of the access point (Access Point Name, or APN). To access the Internet via the Tele2 network, you must use the initialization string: AT+CGDCONT=1,"IP","internet.tele2.ru"

Creating a remote telephone connection.

There are 2 options to do this.

Option 1. Automatic creation of a remote telephone connection.
If your mobile phone manufacturer provides a special program for accessing the Internet, run this program on your computer. Use the following information as settings:
APN: internet.tele2.ru
Call numbers:

Username and password: leave blank.

Option 2: Manually creating a remote telephone connection.
In this case, you will need to create a new Internet connection on your computer. Use the following information as settings:
Phone number: *99#
Username and password: leave blank

If you are unable to establish a connection to the network, try changing the set phone number to *99***1# .
Additional characters ***1 indicate the WAP profile and settings used in the phone with CID 1.

When connecting to the Internet with Internet settings, make sure that the APN access point is specified in the phone settings: internet.tele2.ru.
If you have specified an APN access point: wap.tele2.ru, GPRS charging will be made at WAP prices.

Usually customize Mobile Internet no need, since the connection occurs during the first initialization with a SIM card, and the settings come automatically. But you shouldn't hope for it. Still, there are failures, due to which you have to manually configure the settings for the mobile Internet yourself. For manual setup, all data can be found on the Beeline operator portal, as well as through the support service.

How to set up Beeline mobile Internet on your phone or tablet?

As stated above, the Internet can be installed on your mobile device automatically, or manual configuration may still be required. Depending on the model of the device you are using. For most new devices (phones, tablets), automatic settings, if they did not arrive on their own, can be ordered from the official website, using your computer, or by dialing a special service number on the device.

Before setting up mobile Internet on your device, you should find out whether the “Pack of three services” service is activated. To check it you should dial the service number 067409 . After submitting your application, you will receive a full list of connected services to your phone in the form of SMS. If you do not have this service connected, you should connect it to access the Internet. Send USSD service command: *110*181# .

Automatic Internet setup Beeline

To get automatic Beeline Internet setup on your phone, you should go to the Beeline operator website. On the official portal, go to “Phone Settings”, in the window that opens, indicate the type and name of the device you are using, as well as its model. Next, select the “Mobile Internet” item, in which you will find out whether the system can send you automatic settings for access to the global network to your device.

If there are automatic settings for your device, you should enter your number in the appropriate field, to which the Beeline Internet settings will be sent. If you find yourself in a situation where a computer is not at hand, then settings for the Internet can be obtained by ordering a service number 0611 and follow the system prompts. There is also a way to request automatic settings for Internet access. By dialing a special number 0117 and having received automatic settings for Internet access, you should save them and then reboot the device.

Manually setting up Beeline Internet on your phone

The table below presents items with settings for entering into the device yourself. Those items that are not listed here should not be filled out. Leave them in the state in which they are specified by default on your device.

• Name Beeline Internet
• APN internet.beeline.ru
• Login beeline
• Password beeline
• Network type IPv4
• PAP authentication type
• APN type default

In most devices, even with various types operating systems Beeline Internet settings are practically the same.

Beeline Internet settings on Android

To set up the Internet in this type of device, go to the “Settings” section, then to the “Other networks” tab. In the dialog box that opens, select the "Mobile networks" tab. In the column called "Mobile data" check the box. Next you need to go to the “Access Points” tab. In this tab, to add settings, click the corresponding “Add (+)” button and enter the settings that were presented above. After entering, save them. Next, return to the “Access Points” tab and indicate the profile you just created, through which you will subsequently access the Internet. Below are all the sequential steps of creating a profile in the form of a screenshot, as well as a video at the end.

Beeline Internet settings on Windows Phone

In this type of device, you will need to go to the “Settings” of your device, and then go sequentially to the tabs: “Personal configuration” - “Adding a new” - “Internet”, here you fill in all the lines from the table above, not forgetting to save the result. After saving the profile, return to the “Settings” section. Next, select the “Configuration” tab - “Standard configuration settings” - “Personal configuration” - “Functions” - and here select the profile you saved “As standard”.

Beeline Internet settings on iOS (iPhone, iPad)

In these devices, manual setup is much easier: go to “Settings” - “Cellular Data” - here you move the system slider to the “On” state. Next, go to “APN Settings” - here you also enter the manual settings presented in the table above. After you have entered the settings, you need to save them, and in order for them to be activated, you may sometimes need to restart your mobile device. Next, to access the Internet, turn on “Data transfer” in the menu.

But there are still cases when the user himself cannot configure his device. In a specific situation, a service number will help you 06503 , to which the system will respond by sending you detailed setup instructions.

The main function of MMS is the exchange of multimedia: videos, photos, audio files. Typically, new smartphones have standard settings installed and the phone works well with them. Sometimes these parameters are reset, and you have to set everything manually. You will learn how to get the MMS settings for a megaphone from the operator or set up the MMS operation yourself with your own hands.

Automatic MMS settings on Megafon

The easiest option is to get the settings from the operator. The provider will send the required SMS package, which will set the required parameters, which will take a minimum of time.

How to get automatic MMS settings on Megafon

This method is suitable for those who are not in a hurry. Activating the service is easy. You need to send an SMS message with the text MMS to number 5049. If the option does not work, then you can call one of the additional numbers: 05049 or 05190. Afterwards, an SMS with the required configuration will be sent to your phone, which will set all the settings. Then you should restart the phone.

It is worth remembering that the operator may charge an additional fee for this service.

Setting up MMS Megafon manually

Setting the settings yourself will not cause difficulties for the average user.

To set the MMS megaphone settings on Android, iPhone, Windows Phone, you need to complete the following steps:

1. Go to settings

iPhone: Settings - cellular– Cellular data transmission;

Android: Settings – Wireless networks – Mobile network – Access point;

Windows: Settings – Data transfer – Add Internet access point;

1. Enter parameters:

Access point: mms.mc;

Username: MMS;

Password: mms;

IP: 10.77.77.10;

Home URL: http://mmsc:8002;

Session: Permanent.

1. To further access the Internet, you need to enable data transfer.

While in your home region, sending MMS at the selected rate is free. When roaming you will have to pay for this service. To avoid accidentally spending money, you should temporarily disable the service. To do this, you need to send an empty request to *105*308*0#.

Articles and Lifehacks

Automatic Beeline Internet settings make life much easier for many users. And if you decide, you won't have to manually enter the required values, worrying whether all the characters are written correctly.

If you are a subscriber of the Beeline network, then the Internet is connected to your device by default, according to the tariff that you chose when purchasing a SIM card. Therefore, you are not required to perform any special actions.

If for some reason you turned off the Internet on your device, then to resume its operation, dial the following combination on your phone: *110*181#. This can also be done by calling the operator.

How to get automatic settings

After a few seconds, the settings will be sent to your phone. All you have to do is save the received data.

Set up Beeline Internet on the website

1. Find the “Phone Settings” section
2. Select a device using the list. You can also enter the name manually.
3. Select the “Mobile Internet” service and check the data connection status on your phone.
4. Click on the line “Automatic configuration”. There is also a manual configuration option available here, but you don't need it yet.
5. Just below you will see a field where you will need to enter your phone number.
6. Click on “Send settings” and wait for the information to arrive on your mobile device.
7. Save the received settings.

• The APN line should read internet.beeline.ru.
• Username – beeline.
• The Password item should contain beeline.

home » How to earn » How to get automatic settings. How to get automatic Internet settings from MTS on Android. How to set up mobile Internet on Beeline? A number to send or send phone settings to receive mms and sms on a beeline phone. Possible