Foreman of pumping unit operators job description. Job description for wastewater treatment plant operator. Instructions for the operator of a water recycling pumping station
We bring to your attention typical example job description for wastewater treatment plant operator, sample 2019/2020. A person with primary or secondary vocational education, special training and work experience can be appointed to this position. Don’t forget, every instruction from a wastewater treatment plant operator is handed out against a signature.
Typical information on the knowledge that a wastewater treatment plant operator must have is provided. About duties, rights and responsibilities.
This material is part of the huge library of our website, which is updated daily.
1. General Provisions
1. The operator of treatment facilities belongs to the category of workers.
2. A person with a secondary education is accepted for the position of wastewater treatment plant operator professional education or primary vocational education and special training and work experience ________ years.
3. The operator of treatment facilities is hired and dismissed by the director of the organization on the recommendation of the head of production (site, workshop)
4. The wastewater treatment plant operator must know:
a) special (professional) knowledge for the position:
— installation of treatment facilities, their operating mode;
— communications of channels and pipelines;
— timing of preventive repairs of equipment and cleaning of drainage trays;
— arrangement of dosing devices;
— systems of inlet and outlet communications, electric pumps, equipment for purging and pumping sludge;
— process of water purification using biofilters;
— fraction of the filter layer used;
— alternating periods of filter charging;
— keeping a log of work on biofilters;
— methods of natural drying of sewage sludge;
— design and purpose of natural drying structures;
b) general knowledge of an employee of the organization:
— rules and regulations of labor protection, safety precautions, industrial sanitation and fire protection,
— rules for using personal protective equipment;
— requirements for the quality of work (services) performed, to rational organization labor in the workplace;
— types of defects and ways to prevent and eliminate them;
— production alarm.
5. In its activities, the operator of treatment facilities is guided by:
— legislation of the Russian Federation,
— Charter of the organization,
- orders and instructions director of the organization,
- this job description,
— Internal rules labor regulations organizations,
— __________________________________________________.
6. The operator of the treatment plant reports directly to the worker with more highly qualified, production manager (site, workshop) and director of the organization.
7. During the absence of the operator of treatment facilities (business trip, vacation, illness, etc.), his duties are performed by a person appointed by the director of the organization on the proposal of the head of production (site, workshop) in the prescribed manner, who acquires the corresponding rights, duties and is responsible for the performance duties assigned to him.
2. Job responsibilities of the wastewater treatment plant operator
The job responsibilities of the wastewater treatment plant operator are:
a) Special (professional) job responsibilities:
— Maintenance of a complex of treatment facilities with a capacity of up to 5 thousand m3 per day using mechanisms.
— Release of sediment from settling tanks.
— Regulation of the operating mode of structures depending on the flow of waste liquid.
— Distribution of water over the surface of biofilter sections.
— Cleaning of distribution devices.
— Setting up and charging dosing devices and alternating periods.
— Monitoring the air supply to the filter.
— Elimination of swimming of filter surfaces; Baying of the filter layer.
— Maintenance of sites and ponds.
— Monitoring the correct distribution of sediment along the cascades of sludge beds.
— Cleaning of drainage ditches, drainages from silting and removal of summer time weeds; removing ice in winter.
— Monitoring sediment levels and temperatures in digesters.
— Maintaining constant gas pressure in the dome space and gas network.
— Carrying out preventive and routine repairs of structures and mechanisms under the guidance of a more highly qualified operator.
b) General job responsibilities of an employee of the organization:
— Compliance with the internal labor regulations and other local regulations of the organization,
— internal rules and standards of labor protection, safety precautions, industrial sanitation and fire protection.
— Execution within employment contract orders of the employees to whom it was repaired in accordance with these instructions.
— Performing work on acceptance and delivery of shifts, cleaning and washing, disinfection of serviced equipment and communications, cleaning of the workplace, devices, tools, as well as maintaining them in proper condition;
— Maintaining established technical documentation
3. Rights of the operator of treatment facilities
The operator of treatment facilities has the right:
1. Submit proposals for management’s consideration:
— to improve work related to those provided for herein instructions and duties,
- about attraction to material and disciplinary liability workers who violated production and labor discipline.
2. Request from structural divisions and employees of the organization the information necessary for him to fulfill his job responsibilities.
3. Get acquainted with the documents defining his rights and responsibilities for his position, criteria for assessing the quality of performance of official duties.
4. Get acquainted with the draft decisions of the organization’s management relating to its activities.
5. Require the management of the organization to provide assistance, including ensuring organizational and technical conditions and execution of the established documents necessary for the performance of official duties.
6. Other rights established by the current labor legislation.
4. Responsibility of the wastewater treatment plant operator
The treatment plant operator is responsible in the following cases:
1. For improper performance or failure to fulfill one’s job duties provided for in this job description - within the limits established by labor legislation Russian Federation.
2. For offenses committed in the course of their activities - within the limits established by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage organizations - within the limits established by the current labor and civil legislation of the Russian Federation.
Job description wastewater treatment plant operator - sample 2019/2020. Job responsibilities of a wastewater treatment plant operator, rights of a wastewater treatment plant operator, responsibilities of a wastewater treatment plant operator.
This job description has been automatically translated. Please note that automatic translation is not 100% accurate, so there may be minor translation errors in the text.
Preface to the job description
0.1. The document comes into force from the moment of approval.
0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.3. The document has been approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.
1. General Provisions
1.1. The position "Pumping unit operator of the 3rd category" belongs to the category "Workers".
1.2. Qualification requirements- complete general secondary education and vocational education without work experience requirements or complete general secondary education and professional training in production. Advanced training and work experience as a 2nd category pumping unit operator - at least 1 year.
1.3. Knows and applies in practice:
- structure of piston and centrifugal pumps for pumping water, liquid fuel and other liquids;
- diagrams of air ducts, suction and discharge pipelines and control devices;
- design of clinkers and filters;
- basic knowledge of electrical engineering, hydraulics and mechanics;
- ways to troubleshoot equipment operation and eliminate accidents;
- purpose and conditions of use of instrumentation;
- procedure and rules for keeping records of the operation of installations.
1.4. A pumping unit operator of the 3rd category is appointed to the position and dismissed from the position by order of the organization (enterprise/institution).
1.5. The pumping unit operator of the 3rd category reports directly to _ _ _ _ _ _ _ _ _ _ .
1.6. A pump installation operator of the 3rd category supervises the work of _ _ _ _ _ _ _ _ _ _ .
1.7. During his absence, a 3rd category pumping unit operator is replaced by a person appointed in accordance with the established procedure, who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.
2. Characteristics of work, tasks and job responsibilities
2.1. Serves pumping units equipped with piston and centrifugal pumps with a total flow of more than 1000 to 3,000 m3/h of water, pulp and other non-viscous liquids, and pumping units for pumping oil, fuel oil, tar and other viscous liquids with a total flow of over 50 t/h.
2.2. Maintains pumps and pumping units in the field and on construction sites with each pump or unit supplying over 100 to 1000 m3/h of water and wellpoint units with pumping supply over 100 to 600 m3/h each.
2.3. Serves vacuum pump installations for degassing coal mines with a total supply of over 6000 m3/h to 18000 m3/h of methane-air mixture.
2.4. Starts and stops motors and pumps.
2.5. Maintains the specified pressure of water and other pumped liquids, controls continuous work pumps, motors and fittings of the pipeline section being serviced.
2.6. Identifies and eliminates defects in equipment operation.
2.7. Maintains technical records and reporting on the operation of installations.
2.8. Performs Maintenance pumping equipment and participates in its medium and major repairs.
2.9. Knows, understands and applies current regulations relating to his activities.
2.10. Knows and complies with the requirements of regulations on labor protection and environment, complies with the standards, methods and techniques of safe work performance.
3. Rights
3.1. A 3rd grade pumping unit operator has the right to take action to prevent and eliminate cases of any violations or inconsistencies.
3.2. A pumping unit operator of the 3rd category has the right to receive all social guarantees provided for by law.
3.3. A pump installation operator of the 3rd category has the right to demand assistance in the performance of his duties and the exercise of his rights.
3.4. A pumping unit operator of the 3rd category has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.
3.5. A pumping unit operator of the 3rd category has the right to get acquainted with draft documents relating to his activities.
3.6. A pumping unit operator of the 3rd category has the right to request and receive documents, materials and information necessary to perform his job duties and management orders.
3.7. A pumping unit operator of the 3rd category has the right to improve his professional qualifications.
3.8. A pumping unit operator of the 3rd category has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.
3.9. A pumping unit operator of the 3rd category has the right to familiarize himself with documents defining the rights and responsibilities of the position held, and criteria for assessing the quality of performance of job duties.
4. Responsibility
4.1. A pumping unit operator of the 3rd category is responsible for failure to fulfill or untimely fulfillment of the duties assigned by this job description and (or) failure to use the granted rights.
4.2. The operator of pumping units of the 3rd category is responsible for failure to comply with the rules of internal labor regulations, labor protection, safety precautions, industrial sanitation and fire protection.
4.3. A 3rd category pumping unit operator is responsible for disclosing information about an organization (enterprise/institution) that is a trade secret.
4.4. The operator of pumping units of the 3rd category is responsible for failure to fulfill or improper fulfillment of internal requirements regulatory documents organization (enterprise/institution) and legal orders of management.
4.5. A pumping unit operator of the 3rd category is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.
4.6. The operator of pumping units of the 3rd category is responsible for causing material damage to the organization (enterprise/institution) within the limits established by the current administrative, criminal and civil legislation.
4.7. The operator of pumping units of the 3rd category is responsible for the unlawful use of the granted official powers, as well as their use for personal purposes.
I CONFIRM:
[Job title]
_______________________________
_______________________________
[Name of company]
_______________________________
_______________________/[FULL NAME.]/
"_____" _______________ 20___
JOB DESCRIPTION
Pumping unit operator, 4th category
1. General Provisions
1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of a 4th category pumping unit operator [Name of the organization in genitive case] (hereinafter referred to as the Company).
1.2. category is appointed to a position and dismissed from a position in the manner established by current labor legislation by order of the head of the Company.
1.3. A 4th grade pumping unit operator belongs to the category of workers and reports directly to [name of the position of the immediate supervisor in the dative case] of the Company.
1.4. A person with secondary vocational education and appropriate training is appointed to the position of 4th grade pumping unit operator without any work experience requirements.
1.5. IN practical activities The operator of 4-grade pumping units must be guided by:
- local acts and organizational and administrative documents of the Company;
- internal labor regulations;
- rules of labor protection and safety, ensuring industrial sanitation and fire protection;
- instructions, orders, decisions and instructions from the immediate supervisor;
- this job description.
1.6. A 4-grade pumping unit operator must know:
- device and design features of centrifugal, piston pumps, vacuum pumps and pipe pumps various systems;
- design and location of outer chambers, pipelines, grids, wells and instrumentation;
- electrical engineering, hydraulics and mechanics;
- installation of serviced electric motors, direct and alternating current generators, transformers, switchgear equipment, electrical networks and electrical appliances;
- rules for starting and stopping all pumping equipment;
- methods for troubleshooting equipment and eliminating accidents;
- rules and regulations of labor protection, safety precautions (when servicing electrical installations in the amount qualification group III) and fire protection.
1.7. During the period of temporary absence of a 4th grade pumping unit driver, his duties are assigned to [deputy position title].
2. Job responsibilities
A 4th grade pumping unit operator performs the following labor functions:
2.1. Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps of various systems with a total capacity of over 3000 to 10000 m 3 per hour of water, pulp and other non-viscous liquids.
2.2. Starting, regulating the operating mode and stopping motors and pumps. Maintenance of pumps and pumping units in the field and on construction sites with a pump capacity of over 1000 to 3000 m 3 per hour of water each and wellpoint and vacuum pump units with a pump capacity of over 600 m 3 per hour each.
2.3. Maintenance of pumps and pumping units in coal mines with a total pump capacity of over 18,000 m 3 per hour of methane-air mixture.
2.4. Monitoring the provision of a given pressure of liquid, gas and pulp in the network of the serviced area.
2.5. Service transformer substations under the guidance of a more highly qualified driver.
2.6. Identification and troubleshooting of pumping equipment, including electric motors and electrical circuits of process equipment.
2.7. Maintenance of power and lighting electrical installations over 1000 V.
2.8. Performing electrical work of medium complexity.
2.9. Load regulation of the electrical equipment of the site (substation).
2.10. Preparation of defect reports for repairs.
In case of official necessity, a fourth-grade pumping unit operator may be involved in performing his job duties overtime, in the manner prescribed by law.
3. Rights
A 4th grade pumping unit operator has the right to:
3.1. Get acquainted with the draft decisions of the enterprise management concerning its activities.
3.2. Submit proposals for improvement of work related to the responsibilities provided for by this job description for management's consideration.
3.3. Report to your immediate supervisor any deficiencies identified during the performance of your duties. production activities enterprise (its structural divisions) and make proposals for their elimination.
3.4. Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform their job duties.
3.5. Involve specialists from all (individual) structural divisions of the Company in solving the tasks assigned to them (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the Company).
3.6. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.
4. Responsibility and performance evaluation
4.1. The operator of pumping units of the 4th category bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:
4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.
4.1.2. Failure or improper performance of your labor functions and the tasks assigned to him.
4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.
4.1.4. Inaccurate information about the status of the work assigned to him.
4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.
4.1.6. Failure to ensure compliance with labor discipline.
4.2. The assessment of the work of a driver of 4-grade pumping units is carried out:
4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.
4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on documented results of work for the evaluation period.
4.3. The main criterion for assessing the work of a driver of 4-grade pumping units is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.
5. Working conditions
5.1. The work schedule of a 4th grade pumping unit driver is determined in accordance with the internal labor regulations established by the Company.
5.2. Due to production needs, the driver of 4-grade pumping units is required to travel to business trips(including local significance).
I have read the instructions on ___________/___________/“____” _______ 20__.
Job description for 6th grade pumping unit operator
This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation and other regulations governing labor relations in the Russian Federation.
1. General Provisions
1.1. A pumping unit operator of the 6th category belongs to the category of workers and is directly subordinate to [name of the position of the immediate supervisor].
1.2. A person with special training without any work experience requirements is accepted for the position of pumping unit operator of the 6th category.
1.3. A pumping unit operator of the 6th category is hired and dismissed from work by order of [position of the head of the organization].
1.4. A pumping unit operator of the 6th category must know:
— arrangement and design of equipment for high-power pumping units equipped with engines, pumps and pipe pumps of various systems;
— design and layout of anterior chambers, wells, pipelines and filters;
— automation and telemechanics of serviced equipment;
— methods of testing the equipment being serviced;
- full electrical diagram serviced object (area);
— adjustment and repair of instrumentation and automatic control devices;
— rules and regulations of labor protection, safety precautions (when servicing electrical installations in the scope of qualification group V) and fire protection.
2. Job responsibilities
The operator of pumping units of the 6th category is assigned the following job responsibilities:
2.1. Maintenance of pumping stations (substations, installations) equipped with pumps and pipe pumps of various systems with a total capacity of over 15,000 m3/h of water and pulp.
2.2. Maintenance of pumps and pumping units in the field, on construction sites and at industrial water intakes with a capacity of over 5000 m3/h of water each.
2.3. Monitoring the uninterrupted operation of drive motor pumps, fittings and pipelines of the serviced area, as well as water pressure in the network.
2.4. Inspection and regulation of particularly complex pumping equipment, water pressure devices, control devices, automation and safety devices.
2.5. Identification and elimination of the most complex defects in pumping units.
2.6. Inspection and load testing of repaired equipment.
2.7. Maintenance of power and lighting installations.
2.8. Replacement of control and measuring instruments.
2.9. Maintenance of electrical equipment with automatic process control.
2.10. Checking and troubleshooting electrical equipment.
3. Rights
A pumping unit operator of the 6th category has the right to:
3.1. For all social guarantees provided for by law.
3.2. Require the management of the enterprise to provide assistance in fulfilling its professional responsibilities and exercise of rights.
3.3. Require the creation of conditions for the performance of professional duties, including the provision of the necessary equipment, inventory, a workplace that complies with sanitary and hygienic rules and regulations, etc.
3.4. Payment of additional expenses for medical, social and professional rehabilitation in cases of health damage due to an industrial accident and occupational disease.
3.5. Get acquainted with the draft decisions of the enterprise management concerning its activities.
3.6. Submit proposals for improvement of the organization and methods of work performed by the enterprise management for consideration.
3.7. Request personally or on behalf of your immediate supervisor documents, materials, tools, etc., necessary to perform your job duties.
3.8. Improve your professional qualifications.
3.9. Other rights provided for by labor legislation.
4. Responsibility
A pumping unit operator of the 6th category is responsible for:
4.1. For failure to perform or improper performance of one’s job duties as provided for in this job description - within the limits determined by the current labor legislation of the Russian Federation.
4.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
4.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, and civil legislation of the Russian Federation.
Job description for 6th grade pumping unit operator
A pumping unit is used to move substances in a liquid aggregate state into various reservoirs. This complex is necessary in various industrial fields. For example, in agriculture or during oil production. And for the successful operation of the equipment, a special worker is needed - a pumping unit operator.
Description of the profession
A pumping unit operator is a specialist who has a complete understanding of how a particular pumping system functions, how in practice it is necessary to use readings from instrumentation, as well as what procedures must be carried out to maintain the proper level of operation of all equipment.
Even if the installations are fully automated, they need a driver who can control and maintain the established operating mode. And in the event of an emergency, either urgently stop the fluid supply process or change the mode.
The worker must be able to understand design features in order to be able to identify malfunctions and then eliminate them. If, during the inspection of the installation’s operability, a malfunction was discovered that is beyond the worker’s qualifications, he informs the employer about it. In this case, it is prohibited to use incorrectly functioning equipment.
Before obtaining permission to work independently on a pumping unit, it is necessary to undergo a medical examination to identify contraindications for health reasons. In the course of further work, such inspections will be carried out regularly according to the schedule established at the enterprise.
The operator of pumping units also undergoes special instructions in the following areas: labor protection, safety requirements. Subsequently, they are repeated annually. If the level of knowledge in these areas does not correspond to the required level, the driver cannot be admitted to independent work on installation.
While working with pumping units, the operator is negatively affected. For example, high level noise on the working perimeter or strong vibration from equipment. In addition, the machines and mechanisms that are used at work pose a danger to the specialist. Their malfunctions can lead to hazardous situations. Therefore, all specialists are required to wear special clothing, safety shoes and other protective equipment in the workplace.
The operator of pumping units must have the skills to provide first aid medical care, if an accident occurs during work, and also report the incident to the shift manager.
Where can you learn to be a pumping unit operator?
In order to work as a machinist, you must have a special education, which can be obtained in several ways. The first way is to enroll in secondary specialized educational institution after 9th or 11th grade in the corresponding specialty. In this case, the duration of education will vary from two to four years.
The second way to get an education as a pumping unit operator is to take specialized courses at accredited training centers. Then obtaining the relevant skills can take up to one year. Everything will depend on the format of the courses and the intensity of the classes.
In addition, drivers can take special advanced training courses. There are also many areas of professional retraining courses. They need to be used if the worker decides to gain skills in a related specialty, or completely change the type of his professional activity.
Professional categories of pumping unit operator according to ETKS
The pump operator profession has five skill levels that determine the types of equipment the worker will handle. At the same time, the rest of the functionality is similar for all specialists - Maintenance, repair work, control and monitoring of the supply of substances.
Pumping unit operator 2nd category
It has necessary preparation for working with equipment whose capacity does not exceed 1000 cubic meters. m/h of liquid used.
Pumping unit operator 3rd category
Engaged in the operation of pumps with a capacity of over 1000, but not more than 3000 cubic meters. m/h liquid.
Pumping unit operator 4th category
Involved in working with equipment with a capacity of 3,000 to 10,000 cubic meters. m/h.
Pumping unit operator 5th category
Works at stations with a capacity of over 10,000, but not higher than 15,000 cubic meters. m/h liquid.
Pumping unit operator 6th category
Operates the most powerful installations. Their productivity exceeds 15,000 cubic meters. m/h.
Personal qualities of the profession of pumping unit operator
The work of a driver requires a person not only to have specific knowledge and skills, but also to have certain character traits. For example, attention to detail, observation, discipline, responsibility. Also, when working as a pumping unit operator, you need a good visual memory.
And since a specialist can be negatively affected during work, he needs to undergo regular medical examinations and monitor your health. In addition, persons with chronic diseases of the heart, respiratory system, joints, as well as nervous and mental disorders cannot be allowed to work at the installation.
Salary level for the profession of pumping unit operator
A qualified specialist can count on a monthly salary of 40,000 rubles.
Pros and cons of the profession of pumping unit operator
Among positive points specialties, the following should be noted:
demand in the labor market;
prospects career growth;
decent monthly income.
TO cons professions should include:
- dangerous and harmful conditions labor.
