How to dye faux fur blue. We give a fur product a second life - we learn how to dye fur at home. How to paint faux fur with acrylic

The fur fades in the sun. Precipitation also affects its brightness. As a result, even the most expensive and high-quality fur coat begins to look shabby and old over time. Painting will help get rid of signs of wear.

First, clean the fur: comb it, remove dust and other small debris. If you do not do this, foreign particles will not allow the paint to lay down evenly. Then choose the product you will work with. Remember that even the most durable options will only maintain a given color for 1 season. By the time the next one begins, there will be no trace left of the painting.

How can you dye fur?

Most often, housewives turn to either professional dyes designed for use on fur products, or regular hair dye. The latter will have to be purchased from large quantities. Especially if the pile is long, thick, and the fur coat is not a shortened model.

Also It is definitely worth conducting a compatibility test. Apply the purchased dye to an inconspicuous area of fur. Follow the allotted time. Rinse it off. Wait a couple of days. If nothing bad happens to the item during this period and you are satisfied with the resulting shade, proceed with full-scale painting.

What is needed for the job?

List of items and materials that will be needed in the process:

salt, soda;
glycerin, ammonia;
specialized product for washing fur items;
water.

Self-painting algorithm

So, you need:

Before applying some types of paint, you will have to wet the fur. Just spray some water from a spray bottle.

Important nuances

When applying, try to cover all areas, don't miss anything, but move quickly. Otherwise, one part of the product will be painted better than the other. This will happen due to the different duration of exposure to pigments. If you have problems with the speed of completing tasks or have no experience, you should resort to a spray gun. Just don't bring it too close to the item of clothing. You need to spray from a distance (about 50 cm).

Important! If you use specialized paint sold in cans, you should spray it from a distance of 60–70 cm.

After application is complete, let the paint sit for the required time. The waiting time depends on the active dyes, but usually the instructions say 30–45 minutes. After the allotted time has passed, rinse the fur coat in a vinegar solution and blot the pile with paper towels. This will remove any remaining paint.

Squeezing by hand, twisting, running sponges over the product, or performing other manipulations aimed at speedy drying is prohibited. For this purpose, you can only use napkins.

The next step is optional, but recommended. Experienced housewives advise immediately after removing any remaining dye, apply a mask for colored hair to the undercoat. The best products are professional products that not only protect the color from being washed off, but also take care of the hair structure. Their effect will be noticeable within 2–5 minutes. After this time, rinse the clothes again.

How to dry it properly?

After all the work, the fur coat is placed on wide hangers that fit perfectly in size. It is also worth paying attention to what material the item is made of. Thin steel simply cannot withstand it and will bend from the weight of a damp fur coat, if it is, say, mink or sable fur. That is, there is no point in relying on the fact that the hanger has never been deformed under a fur product before, because until this moment outerwear was always dry.

Best option: durable wooden hangers. Place them together with a short fur coat in a warm room. Try to ensure that heating devices, if they are working, are as far away from the fur as possible. If you don’t have good hangers at hand, you can resort to another drying method.

Algorithm of actions:

let the water drain;
apply glycerin and set the direction of the pile, if necessary;
fold in half;
place on a hard, flat surface (fur should be on top);
place a well-absorbent cloth;
Periodically replace the absorbent cloth with a dry one.

At first you will have to do this every 1.5-2 hours, then the duration of the break will begin to increase. In general, drying a fur coat takes from 3 to 5 days. During this time, experts recommend combing the product and inspecting its undercoat for strange changes.

If bald spots, deformation or other defects appear, immediately seek help from a dry cleaner. Perhaps the fur can still be saved.

Alas, over time, the fur on our favorite fur coats loses its original appearance, changing in color and shape. But you don't have to run out for a new product. The first reason is that it is far from cheap, and the second is that we will tell you how to dye fur at home. Of course, it should be rightly noted that not everyone decides to paint at home. Most are simply afraid of ruining the fur and prefer to entrust the product to professionals. This, of course, has its own meaning. But with our recommendations, you will not only not spoil the product, but also breathe into it new life. The fur will regain its shape, the fibers will become soft, and most importantly, the color of the product will be like new again. It needs to be cleaned before painting. Without this procedure, painting may result in unpainted areas, which will only worsen the situation.

Cleaning the fur

For cleaning we need:

water – 1 l;
salt – 20 g;
ammonia - (25%) -3 g;
detergent – 1 g;
soda – 2 g.

Mix and soak the product in the resulting solution for at least an hour. Next, squeeze and rinse well under running water. It must be completely dry before painting.

How to dye natural fur at home

For painting we will need:

paint for fur: in relation to the original color, you need to choose a darker shade;
fatty cream (glycerin will also work);
vinegar.

Fur dyeing at home

After we have cleaned the pile with the solution, we need to stretch it on the board and secure it. This will prevent the fur from shrinking.
In order to avoid drying out of the product, its reverse side must be coated with fatty cream or glycerin.
We wet the pile a little and paint it.
Mix warm water and vinegar.
We place the fur coat after dyeing.
The product should be dried without using a hair dryer.

As we can see, dyeing fur at home is not very difficult. You just need to follow the rules: before painting, be sure to clean the product with a solution, check in a small area how the pile reacts to the paint and coat the core with glycerin.

How to dye arctic fox fur at home

Painting the Arctic fox is carried out according to the same principles. It is necessary to clean it with a solution. If there are stains on the product, they can be removed with a solution of one teaspoon of ammonia and three tablespoons of salt dissolved in one liter of water.

Must be painted on damp pile. After the paint has settled, wash it off in the shower. This type of fur can be dried with a hairdryer.

How to dye fur at home with hair dye

It would seem that there is another way to dye fur at home. It turns out that regular hair dye is great for this. The advantages of this method are that it produces rich color and ease of painting. The downside is that such a rich color does not last that long, about six months.

In order to radically change the color, the fur coat should be lightened using an oxidizing agent.
Paint evenly with a special brush.

If you like experiments, try dyeing your fur coat in tonic. It will give a temporary shade, and you will definitely understand your preferences.

We figured out what and how to dye fur at home. After painting, special care is required. You can apply hair balm dissolved in water and rinse it off the product. The fur will get a special color and the product will last much longer. We wish you good luck!

Products made from faux fur (bags, fur coats) are visually almost indistinguishable from natural products and allow you to save on purchases. But during use, things inevitably lose their attractiveness and look faded, dull and worn out. The situation is easy to fix if the owner of the item knows how to dye faux fur at home.

How to choose paint?

Restoring your favorite item will require some time and effort. Choosing paint is the first task that needs to be resolved before starting work. To decide on the right color, it’s enough to imagine the product after dyeing and understand how you want to see it. If the owner only plans to restore things to their lost beauty, shades that are as close to natural as possible suit him. Whereas a radical change in color implies a careful choice of dye.

Faux fur is dyed using standard hair dye. It is important that the mixture is of high quality, provides a stable result and does not spoil the material. Shampoos and tonics will help those who are only going to slightly “refresh” their clothes or accessories without radically changing their color.

Where to start coloring?

Preparing faux fur for dyeing begins with thorough cleaning of the product. Traces of grease and dirt will negatively affect the result, the color will be uneven and will not appear fully. Contaminated areas should be treated with soapy water (it is convenient to use cotton wool) the day before the procedure.

After the fur has dried, testing is required. It consists of applying paint to a small area located in inconspicuous places. If you are satisfied with the resulting color, you can move on to working with the entire thing. So, how to dye faux fur at home?

How to dye faux fur correctly

To paint each area evenly, you need to slightly stretch the fur before applying the mixture. For convenience, you can take wooden board, chair, use clothespins and similar products.

When diluting paint, it is important to strictly follow the instructions; a soft brush will do as a handy tool. Coloring is carried out strictly in the direction of the hairs. To dye the base fabric, light pressure on the brush is required.

After applying the paint, you need to wait until the time has elapsed, information about which is in the instructions. Then the faux fur product is carefully cleaned (washed with water). It is convenient to remove dye residues with a clean, damp swab.

You should not wait for the material to dry before combing it; this should be done immediately after dyeing. Next, you need to give the faux fur time to dry completely and go over it with a comb again, giving the fibers the required position. Now you can admire the achieved result - the thing again began to look “like it came from a store.”

It is important to know

The stretch remains until the product dries completely, otherwise a change in its size is inevitable. The item can not only shrink, but also stretch unsightly, as a result of which it will look even worse than before work. It is not always possible to achieve the desired color the first time you dye it (especially if you have no experience). In this case, it is allowed to subject the artificial fur to this procedure again. It is only important that at least 10 days have passed since the first attempt.

You also need to understand that the result depends on the degree of wear. Unfortunately, not all products that have been in use for a long time are subject to rehabilitation.

In order for the paint to apply evenly and reliably color the fur, the product must be prepared for painting. To do this, the fur surface must be cleaned of grease and dirt using special means.

Before painting it is necessary to prepare the fur

To clean you need:

Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
The resulting slurry must be spread in an even layer on the surface to be treated using a clothes brush.
After some time, rinse off the product with running water.

An alternative cleaning solution can be a liquid made from alcohol, vinegar and water, which is applied in the same way as the first option.

Such cleaning products are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.

Typically, standard hair dye is used to refresh the Arctic fox. The fur is quite dense, and therefore you will need several packages to ensure that the resulting color is rich and uniform.

Use hair dye

In this case, you need to choose a paint one or two shades darker than the original. This will avoid unpainted areas and make the item brighter.

Before covering the entire area with paint, you should try to treat a small area. This will allow you to see how the color changes under the influence of chemicals.

Before full dyeing, check how the fur reacts to the dye.

In case of color fading (especially the tips of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to choose the right composition for coloring. For this purpose, hydrogen peroxide and ammonia, taken in different proportions.

Tinted hair balm is an alternative to permanent dye.

Toning with tint balms

It will help to gently color the pile, providing the necessary care for fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation occurs in the form of snow and rain, and can also contaminate light-colored items located in close proximity to the fur.

Items made from arctic fox fur often lose their attractiveness due to yellowing of the ends of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can to treat suede.

Aerosol spray for painting

Before you dye arctic fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70cm. To prevent the pile from sticking together, you need to constantly move the can. After applying the paint, the fur should be combed with a special brush for suede. Moreover, this must be done immediately.

In specialized stores, it is fashionable to purchase special paint in cans for caring for fur. With their help, you can quickly update the shade, making the product brighter.

Professional paint for fur

However, it also has some disadvantages: when it comes into contact with white items or a light fur coat, the dye can be transferred to lighter items. And the color itself will lose its shine and brightness within a few months.

Since mink products are considered quite expensive, dyeing of such fur should be done as delicately as possible.

Before that, you need to check the degree of contamination of the pile. A regular hairdryer will do for this. The air stream should be directed at the pile: if the fibers fall apart, cleaning is unnecessary. However, if the lint moves from one side to the other and clumps together, cleaning may be necessary.

Mink fur is dyed with hair dye

Step by step procedure

The sequence of actions in both cases is identical:

To start painting, you need to put on gloves and take a brush. After this, apply paint to the surface and smear it so that there are no bright spots left.
After waiting the time indicated on the packaging of the product, the product should be rinsed with water at room temperature and vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
Then it needs to be washed off and dried.

Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
When preparing a product for dyeing, the underside of the leather should be covered with cream (or Vaseline) to prevent the surface from drying out.
Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
You should choose a dye tone darker than the natural pile. This will help hide minor imperfections in the skin and give a natural shade.
To renew fox fur, you can use a solution of manganese, diluted to a dark brown tint. You need to apply it to the pile with a sponge, without touching the inner layer (skin). If you neglect to be careful, you can damage the base of the fur, which will lead to rapid wear of the item.
Since the skins may shrink after dyeing, you need to place the product on flat surface and secure it before applying the dye using pins or thin nails.

By using some fur care tricks, you can provide an attractive appearance to the product and extend its wear life.

Almost every woman has a fur item in her wardrobe. During prolonged wear natural fur loses its attractiveness and becomes faded. Some fashionistas dream of changing the color, making it more fashionable and bright. It is quite possible to dye fur at home, the main thing is to adhere to the basic rules given below.

Preparing for coloring

Before you begin the dyeing process, you need to clean the item. This will allow you to paint the product evenly without leaving pale areas on it. A solution prepared from the following ingredients will allow you to carry out this procedure well:

salt (2 tbsp);
ammonia (1 tbsp);
baking soda (2 tablespoons);
washing powder (1 tbsp);
warm water in the amount of two liters.

The components are thoroughly mixed, then the mixture is applied to the fur with a brush, evenly distributing it over the entire surface. For effective cleaning it is necessary wet wipe or use a clean cloth to rinse the soap solution several times. In order for the core (skin) on the back side of the product not to shrink, it must be moist, so it should be wetted.

Interesting! You can clean the item with regular shampoo intended for hair or dishwashing detergent.

Some use aggressive substances: kerosene or lighter refill. With this method, you must always remember that their use can significantly worsen appearance products.

Dry a fur collar or fur coat on hangers in natural conditions, away from heating devices and sunlight, on the street or in a room with good ventilation.

Types of fur

Before you paint this or that thing at home, you need to understand the characteristics of the material. Only in this case can you achieve the desired result and get the desired color or shade. The easiest items to dye are those made from rabbit, mink, and chinchilla. But the procedure should be carried out carefully, since these materials, especially rabbit fur, are highly sensitive to chemicals.

Important! Dying thick fur will require a lot of paint and time. But the result will please the owner of the wardrobe item good color, which will last for quite a long time.

If the fur coat is made from beaver, you should not even try to lighten it, as it will acquire a yellow tint. The muskrat can behave very unpredictably, since not everyone may like the pinkish shades with whitish areas. After some time, the paint will fade and the product will take on a completely different appearance.

Arctic fox coloring

You can paint the arctic fox product in specialized workshops. The cost of such a service is quite high, and not every person can afford to pay a certain amount. There is a way out - you can perform the procedure at home yourself. To do this you need to do the following:

Choose the right paint. It is sold in hardware stores. If you can’t find a suitable color, there is another option - dyeing the fur at home with hair dye. Similar dyes are sold in a wide range of colors: black, red, golden, brown, red and other shades; choosing them will not be a problem.
Strictly following the instructions, dilute the dye.
Put a mask or respirator on your face and gloves on your hands.
It is recommended to treat the flesh with Vaseline, baby cream or glycerin. This will prevent the skin from getting too wet and protect it from drying out.
Dyeing can be done on both wet and dry arctic fox fur. In the first case, the paint lays on the surface quite softly. Apply the substance quickly using a hairdressing brush. This should be done carefully so that there are no unpainted areas left.
If you want to get a leopard color, use a stencil and several colored paints. Holes of different diameters are cut out of thick cardboard, applied to the surface of the product and painted with black and brown paints.
The Arctic fox can get a beautiful, rich shade if only the ends of the pile are painted. Typically, light-colored coloring compounds are used for this.
You can refresh a fur wardrobe item with a spray, painting only the ends. You need to purchase paint intended for suede, which comes in an aerosol. Holding the can at a great distance, you need to make uniform movements. This is a simple and fast way.

After completing the procedure, the arctic fox fur is left for several minutes to obtain the desired shade. The time is indicated on the packaging. Now you should treat the product by preparing the following solution: dilute 5 tbsp in 2 liters of water. spoons of vinegar. As soon as it is ready, immerse the item in it.

Vinegar perfectly fixes the color, gives the fur additional shine and softness, greatly improving the appearance of a fox fur coat or collar. To prevent the item from becoming deformed, the mesh is stretched on the table, secured with clothespins.

To give the Arctic fox a lighter tone, use a hair lightener, which is diluted in accordance with the instructions. You can use hydrogen peroxide, diluting it with water in a ratio of 1 to 3. The prepared product is applied to the product and left for no more than 15-20 minutes, otherwise the villi will become brittle. After the time has passed, the fur is rinsed and sent to dry.

Dyeing a mink coat

Faded mink fur spoils the appearance of a fur coat. In order to restore color and shine, a simple procedure is performed - painting a mink coat. It is necessary to purchase in advance the desired shade of paint, a spray bottle, a comb with thick teeth, rich cream or glycerin, shampoo and hair conditioner. Now you need to do the following steps:

clean the item from dust, dirt, grease;
treat the skin (inner space) with a greasy substance;
prepare the coloring composition in accordance with the instructions;
moisten the surface of the product;
apply a dye to the pile using a spray bottle;
comb hairs;
wash off the paint with shampoo diluted with water;
treat the surface with balm.

The procedure is completed, all that remains is to dry the product, after applying the cream to the inside and combing the hairs.

In the same way you can dye silver fox fur, products made from mouton and any other material. For silver fox, the paint chosen is mainly black or brown. For a mouton fur coat, dark reddish shades and chestnut color are best suited.

Dyeing a fur collar

It is not always necessary to completely paint an item. In some cases, it is enough to dye a fur collar at home. This is quite easy to do using regular hair dye. First, the collar is cleaned of dust and dirt, dried, and then the dyeing process begins:

Using the instructions, you need to dilute the paint.
For uniform coloring, the collar is slightly moistened with water.
The coloring composition is applied by hand (you should first put on gloves). The process should be done quickly, distributing the paint well throughout the pile.

After completing the procedure, the collar is washed well with water and rinsed in a vinegar solution or hair conditioner. It should be dried on a flat surface, stretched and pinned to the base with needles.

Artificial fur

Some people prefer to buy faux fur products. In many characteristics it is not inferior to natural raw materials and sometimes even surpasses them. It can also be colored using hair dye. First you need to select the tone of the dye, clean the product, removing dirt, dust, and grease from it, using a soap solution. After this, remove the remaining soap solution with a damp swab.

Treatment should be carried out one day before staining.

However, you should know that faux fur is dyed in dark colors. You should buy high-quality paint, so as not to spoil the thing.

The coloring composition is obtained by strictly following the instructions. After this, it is applied to the artificial fur with a brush, making movements in the direction of the pile, evenly distributing it. The brush should be pressed so that it touches the fabric base. The paint is left for the time recommended in the instructions, then the material is washed with water, and if necessary, excess paint is removed with cotton swabs. After this, the still damp fibers are combed with a sparse comb and the product is sent to dry.

home » Investments » How to dye faux fur blue. We give a fur product a second life - we learn how to dye fur at home. How to paint faux fur with acrylic