Automatic transmission operator from direct employers. Aerial platform and hydraulic lift operator - what does he do? Salary level for the profession of aerial platform and hydraulic lift operator
Jobs as an operator of an aerial lift truck; vacancies as an operator of an aerial lift truck in Moscow. Job vacancy for aerial platform operator from direct employer in Moscow job advertisements for aerial platform operator, Moscow, vacancies recruitment agencies in Moscow, looking for a job as an aerial platform operator through recruitment agencies and from direct employers, vacancies for an aerial platform operator with and without work experience. Website for advertisements about part-time work and Avito work Moscow job vacancies aerial platform operator from direct employers.
Work in Moscow as an aerial platform operator
Website work Avito Moscow work latest vacancies operator of aerial lift truck. On our website you can find a highly paid job as an aerial lift operator. Look for a job as an aerial lift operator in Moscow, look for vacancies on our job site - a job aggregator in Moscow.
Avito vacancies Moscow
Jobs as an aerial platform operator on the website in Moscow, vacancies as an aerial vehicle operator from direct employers in Moscow. Jobs in Moscow without work experience and highly paid ones with work experience. Job openings for aerial platform operator for women.
Hello! My whole life is connected with special equipment; there is an opportunity to start working on an automobile tower. Do I need to take any exam to obtain permission to drive this car? Is there such a thing as categories of aerial platform operators, and do they depend on the type of vehicle?
Expert's answer:
A hydraulic lift is a special equipment, usually operating on the basis of excavators. It is necessary for moving people to high or distant points to perform various manipulations. This equipment is in demand in construction, among electrical installations, maintenance and industrial enterprises. To operate an aerial platform, you must have the appropriate knowledge and skills, which must be confirmed in the exam.
Initially the driver passes medical checkup, identifying contraindications to the profession. After that, he listens to a course of lectures on the features of hydraulic lifts. Before receiving admission, you must pass the professional level. This procedure is carried out by examination. The future specialist must answer the following types of questions about the car:
- technical device;
- car operating rules;
- methods of performing work and requirements for them;
- design features;
- Traffic Laws;
- fuel consumption standards;
- safety regulations.
Only after completing all the necessary checks is he allowed to begin directly performing manipulations on this machine.
Profession classification
After training, a certificate is issued, which indicates the qualification. Depending on the category, the ability to control certain types of automobile towers is determined. If you have permission for other special equipment without the qualification of a hydraulic lift operator, performing manipulations on the latter is unacceptable. You are allowed to have multiple licenses required to operate specific types of machines.
Rank of aerial platform operators depending on the boom lift height:
- IV– up to 15 m;
- V– 15–25 m;
- VI– 25–35 m;
- VII– more than 35 m.
In the future, the employee has the right to take a refresher course, according to which he will be able to operate equipment with a higher boom lift. Training can be completed for a fee in special institutions or by referral from an employer, who will fully cover the cost of expenses.
Video: Machinist Basics
This job description has been developed and approved in accordance with the provisions Labor Code Russian Federation, Resolution of the State Construction Committee of the Russian Federation dated January 8, 2003 No. 2 “On the set of rules “Labor safety in construction. Industry standard instructions on labor protection”, Decree of the Government of the Russian Federation of December 8, 1999 N 1362 “On approval of the list of professions in primary vocational education”, All-Russian classifier occupations OK 010-93 (OKZ) (approved by Decree of the State Standard of the Russian Federation of December 30, 1993 N 298) and other regulations governing labor relations.
1.1. The operator of the aerial platform belongs to the category of workers and is directly subordinate to [name of the manager's position].
1.2. A person with an initial qualification is accepted for the position of aerial platform operator professional education, driver's license and [insert work experience].
1.3. The operator of the aerial platform is hired and dismissed from work by order of [position of the head of the organization, enterprise].
1.4. The operator of an aerial platform must know: – the structure and operating rules of the aerial platform; – purpose, characteristics, types of tools, devices and materials used; – causes of technical malfunctions and accidents, measures to prevent and eliminate them; – rules for maintaining primary technical documentation, its forms; – repair rules; – safety and labor protection requirements; – safe labor practices, basic means and measures for preventing and extinguishing fires, as well as measures to prevent other dangerous situations in the workplace; – methods of providing first aid to victims of accidents; – ways to prevent exposure to hazardous and harmful production factors.
1.5. Professionally important qualities: [list qualities].
2. Job responsibilities of the employee
The aerial platform operator is assigned the following job responsibilities:
2.1. Use of machines and mechanisms during operation for their intended purpose, in accordance with the instructions 
manufacturing plants.
2.2. Maintaining order in the workplace, clearing debris, snow, ice, preventing violations of the rules for storing materials and structures;
2.3. Attention during work and prevention of violations of labor safety requirements. Before starting work, the aerial platform operator must:
2.4. Wear special clothing and safety shoes.
2.5. Show the manager your license to operate the lift and receive a waybill.
2.6. Clarify the route of movement and the nature of the work performed at the site.
2.7. Receive a note on the waybill to check the technical condition of the lift. After receiving the task to perform the work, the aerial platform operator is obliged to:
2.8. Before leaving for the site, check the serviceability of the crane structures and mechanisms, including:
- inspect the mechanisms and brakes of the lift, their fastening, as well as the chassis;
- check the presence and serviceability of mechanism guards;
- check the lubrication of gears, bearings and ropes, as well as the condition of lubricating devices and seals;
- inspect in accessible places the metal structures and connections of the boom elbows, as well as the structures and welded joints running frame and turning part;
- inspect the condition of the ropes and their fastening on the drum;
- check the serviceability of additional supports, the elastic suspension switch and the stabilizer;
- check the presence and serviceability of instruments and safety devices on the crane (limit switches, lift tilt indicator, load limiter, etc.);
- inspect the electrical installations and hydraulic drive system of the lift.
2.9. Upon arrival at the site, the operator is obliged to present to the work manager a certificate of verification of safe work methods, inspect the installation site and operating area of the lift and make sure that the terrain slope, soil strength, approach dimensions of buildings, as well as power lines meet the requirements specified in the instructions for its operation .
2.10. Together with the slinger, check the compliance of removable lifting devices with the weight and nature of the load, their serviceability and the presence of stamps or tags on them indicating the load capacity, test date and number.
2.11. After starting the engine, the lift operator is obliged to carry out a control check of the machine’s serviceability, including:
- check the operation of the brakes and clutch;
- check the serviceability of lighting devices and sound signals;
- check the serviceability of the cradle lifting mechanisms and installation of outriggers.
2.12. Drivers are required not to start work if there are any of the following violations of safety requirements:
- in case of malfunctions or defects specified in the manufacturer’s instructions, in which their operation is not allowed;
- defects in lifting devices or their inconsistency with the nature of the work performed;
- discrepancy between the characteristics of the lift in terms of load capacity and lifting height and working conditions;
- presence of people, machines or equipment in the work area;
- when the terrain slope exceeds that specified in the manufacturer’s passport. Detected violations of labor safety requirements must be eliminated on our own, and if it is impossible to do this, concrete workers are obliged to immediately report them to the person responsible for the safe performance of work with cranes, as well as the person responsible for the safe operation of the crane.
During work, the tower operator is obliged to:
2.13. Before starting work, check that workers in the cradle and slingers have certificates for the right to carry out work.
2.14. Before starting the movement of the aerial platform, make sure that there are no unauthorized persons in the work area, and that the workers in the cradle have secured the halyards of the safety belts to the cradle fence.
2.15. While working, the driver must:
- ensure that the weight of people, tools and materials in the cradle does not exceed the load capacity specified in the lift’s passport;
- do not allow work to be carried out that causes horizontal loads on the cradle (when pulling a cable or wire, pulling up a load);
- ensure that the distance between the rotating part of the lift and the dimensions of buildings, stacks of cargo and machines is at least 1 m.
2.16. Before lifting people, the lift operator must:
- make sure that the slope of the site at the work site does not exceed the maximum angle specified in the passport, and the soil will not subsidence;
- brake the car with the handbrake and install the lift on the outriggers;
- check the fastening of loads and the fastening of safety belts for persons in the cradle;
- establish a procedure for exchanging signals with workers in the cradle;
- determine, together with the work manager, the boundaries of the dangerous zone below the cradle.
2.17. While workers are in the cradle, the operator of the aerial platform must be in the control cabin and ensure that the workers in the cradle are attached with a belt to the cradle railings, do not lean over them and do not stand on the railings of the fence. The lift operator is obliged to lift, stop and lower the cradle only upon a signal from the workers in them. When lifting to a height close to the maximum limit, the lift operator must perform at a reduced speed.
Before transporting the lift, the driver must:
2.18. Place all work equipment in transport position and secure it.
2.19. Familiarize yourself with the route, the condition of the road, and the requirements for driving through artificial structures.
2.20. Make sure there are no people in the cradle or on the lift structures.
2.21. When transporting the lift under its own power on roads common use The driver is obliged to follow the traffic rules.
2.22. When installing and moving the lift near excavations (pits and trenches), the driver must maintain the approach distance from the bottom of the excavation slope to the nearest support of the lift.
2.23. Carry out installation and work in security zone operating overhead power line, the lift operator is obliged under the direct supervision of engineering and technical workers responsible for the safe performance of work, with the written permission of the organizations that own the lines and the permit specifying safe conditions work.
After finishing work, the forklift driver must:
2.24. Park the car, apply the parking brake and turn off the engine.
2.25. The control cabin should be tidied up and closed.
2.26. Inspect the condition of the lift mechanisms and structures.
2.27. Submit the waybill, report all noticed malfunctions and irregularities during the work process to the manager and the person supervising its technical condition, and make an entry in the logbook.
In case of emergency situations, the aerial platform operator is obliged to:
2.28. If there are signs of a malfunction in the engine, hydraulic system or lifting mechanism, work must be suspended and corrective action taken. If it is impossible to promptly eliminate the malfunction, people are not allowed to be in the cradle at a height; measures must be taken to lower it.
3. Employee rights
The operator of an aerial platform has the right:
3.1. For all social guarantees provided for by law.
3.2. Require the management of the enterprise to provide assistance in fulfilling its professional responsibilities and exercise of rights.
3.3. For the employer to provide free cotton overalls, rubber boots, leather boots, combination mittens, leather boots, suits with insulating lining and felt boots for the winter period.
3.4. Payment of additional expenses for medical, social and professional rehabilitation in cases of health damage due to an industrial accident and occupational disease.
3.5. Get acquainted with the draft decisions of the enterprise management concerning its activities.
3.6. Request personally or on behalf of your immediate supervisor documents, materials, tools, etc., necessary to carry out your duties job responsibilities.
3.7. Other rights provided for labor legislation.
4. Responsibility of the employee
The operator of the aerial platform is responsible for:
4.1. For failure to perform or improper performance of their official duties provided for by this job description, – within the limits determined by the current labor legislation of the Russian Federation.
4.2. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
4.3. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal, and civil legislation of the Russian Federation. Supervisor structural unit[initials, surname] [signature] [date, month, year] Approved by: Chief legal department[initials, surname] [signature] [date, month, year] I have read the instructions: [initials, surname] [signature] [date, month, year]
(( reviewsOverall )) / 5 Users ( 0 Estimates)
Reliability
Convenience and comfort
Maintainability
Ride quality
Profession code - 13507
Who is the course intended for?
The program is intended for workers under the age of 18 with or without specialized education. Persons with category B and C licenses are allowed to operate the aerial platform. Before starting training, you must undergo a medical examination.
Aerial platform is a special device based on truck- constantly used in construction work, repair, restoration, facility maintenance, for repairing power lines, bridges and much more. The operation of the aerial platform is carried out by the operator of the aerial platform, who has sufficient skills and knowledge for this purpose. What kind of profession is this?
How to become a forklift operator and what are his responsibilities?
An aerial platform operator is a person who works on a very specialized machine, therefore, first of all, the operator is required to understand the structure of the machine, its design features, and knowledge of the rules for operating the vehicle. It is also very important to know and follow safety rules when working with aerial platforms.
The aerial platform allows you to lift workers to the required height, along with the tools and materials they need, which will allow you to perform even such tasks as maintaining or repairing power lines, repairing and finishing facades, caring for the green zone of the city and much more. Wherever it is necessary to lift a person to a height, an aerial platform is used, and in a modern city many jobs require lifting to a considerable height.
What should a forklift operator know and do?
He is allowed to work only after passing special education, internships and certifications. The aerial platform operator must:
- understand the structure of the car he is using;
- understand the device and know the rules of operation of the aerial platform as a structure;
- lead technical documentation;
- monitor the condition of the car, keep it in good condition, check its condition before each trip;
- understand the nature and cause of malfunctions, be able to carry out repairs independently;
- carry hand tools in good condition in case of emergency repairs;
- have at your disposal and also be able to use the first fire extinguishing means;
- know and follow all safety standards and regulations;
- adhere to the work execution algorithm;
- follow traffic rules;
- provide workers with the work process in accordance with all labor safety standards.
Why start training to become an aerial platform operator or improve your qualifications?
- The profession of an aerial platform operator is always in demand in any city or town, since certain work at height (whether it is maintaining green areas or providing access in case of fire) is carried out regularly.
- An experienced driver will always be provided with a decent salary.
- Quick specialty training.
Distance learning allows you to conveniently and as effectively as full-time, obtain all the knowledge and skills necessary for the specialty.
- You can always plan your training time yourself, without wasting your personal hours traveling around the city.
- The knowledge course is provided in the same volume as in non-distance learning.
- All our specialists undergo certification, after which they are issued a specialist certificate.
You can view the list of documents required to submit an application on our website! Signing up for distance learning is easy: just fill out and submit the form. Our managers will answer any of your questions: you can get advice by phone or through the feedback form.
WITHOUT DISRUPTION FROM PRODUCTION!
The course was developed taking into account the following regulatory and technical documentation:
- Unified tariff and qualification directory of works and professions of workers. Issue 03;
- Order of Rostechnadzor dated January 29, 2007 N 37 “On the procedure for training and certification of employees of organizations supervised Federal service on environmental, technological and nuclear supervision";
- Rules for the design and safe operation of lifts (towers) PB 10-611-03.
Type of training:
- Primary training for level 2.
- Primary training for level 3.
- For 4th grade.
- For 5th grade.
- For 6th grade.
- For 7th grade.
- For 8th grade.
Course format:
- Remote.
During the courses the following questions are studied:
- Hydraulic equipment.
- Construction, repair and operation of towers and lifts.
- Practical techniques for controlling towers and lifts.
- Information about electrical engineering and mechanics.
- Occupational safety, fire safety, industrial sanitation.
Qualifying exam:
The knowledge acquired during the course for the profession “Aerial platform and hydraulic lift operator” is tested by the examination committee of the educational center “SpetsProf”.
Course program for the profession "Aerial platform and hydraulic lift operator"»
The course includes 72 hours:
- 36 hours theoretical course;
- 36 hours of on-the-job practice.
Required documents
- Copy of the passport.
- Copy work book(in the presence of).
- Copy of diploma (if available).
- Medical certificate.
- Driving category B and C.
Based on the results of testing the acquired knowledge, the following is issued:
- Certificates for certified employees.
- Protocol of the commission with a list of certified employees.
The certificate is valid for 1 year
Repeated training must be completed at least once a year.
For driving specialized equipment knowledge and skills of machinists are required. The technique can be very different, so the profession has many subcategories. One of them is an aerial platform and hydraulic aerial lift driver. From this article you will learn the details of this profession.
Description of the profession
Aerial platform and aerial lift operators help with the following work:
- Repair and setup of billboards.
- Repairing electrical networks.
- Trimming tree branches, etc.
They are capable of lifting workers to a height of up to 55 meters along with the necessary tools.
Only persons over 18 years of age with necessary preparation. Specialists must also undergo a medical examination and safety training. Subsequently, these events will be of a planned nature.
Responsibilities of a hydraulic lift and aerial platform operator
The responsibilities of a special equipment driver include operating it according to its intended purpose; he must also monitor the route and know what types of work are to be done at the site.
The worker must regularly check the serviceability of the aerial platform and hydraulic lift mechanisms.: fasteners, ropes, hydraulic drive and others.
The driver constantly works with documentation, for example, filling out the waybill and checking the workers’ IDs.
The employee's responsibilities include checking the area- no person should be on it while work is being performed. He must also ensure that the weight of workers does not exceed the maximum permissible limit.
Before starting work, the driver must fix the position of the vehicle; he also does not have the right to leave the control cabin during work, since he must monitor the situation of the workers in the cradle: whether they follow safety precautions when performing work at height.
He must know the system of special signals and signs for communicating with workers in the cradle, and methods of providing first aid.
Where can you learn the profession of aerial platform and hydraulic lift operator?
You can learn to become an aerial platform and hydraulic lift operator at specialized colleges and technical schools., where they are accepted after the 9th or 11th grade of school.
In addition, training of specialists can also take place on the basis educational centers. Typically, the course includes theoretical lectures, to which practical exercises are added if necessary.
With any choice of option for obtaining the required specialty, the future driver receives knowledge of the basics of hydraulics and the principles of operation of lifts. He is also required to be instructed on safety rules and proper operation of equipment. After completing the training and passing the certification, young specialists receive a driver’s license for an aerial platform and hydraulic aerial lift, indicating the level of qualification.
Since the work requires not only theoretical skills, but also practice, a novice worker initially works under the guidance of an experienced specialist.
It is worth noting that the rank determines the type of equipment that the driver can operate. In this regard, a worker is allowed to have several certificates for different types cars Thus, a specialist can take advanced training or retraining courses to master the management of new equipment.
Professional categories of aerial platform and hydraulic lift operator
In the profession of aerial platform and hydraulic aerial lift operator, there are four skill levels: fourth, fifth, sixth and seventh. Their difference from each other lies in the height to which the machine can lift the cradle. Otherwise, the workers do the same work.
Correspondence between discharge and maximum lift height:
- 4th category- 15 meters.
- 5th category- 25 meters.
- 6th category- 35 meters.
- 7th category- over 35 meters.
Personal qualities of aerial platform and hydraulic aerial lift operator
To work with special equipment, the driver must have developed certain skills:
- attentiveness;
- observation;
- responsibility;
- caution;
- communication skills;
- stress resistance.
Since working at height is potentially hazardous to health, the operator must be prepared for emergency situations. He should not give in to panic, act quickly and clearly, and also coordinate the actions of those around him.
Salary level for the profession of aerial platform and hydraulic lift operator
Work schedule, qualifications and region of work affect a specialist’s salary.
According to information from employee search services, a specialist can count on the following salary:
- Minimum- 29 thousand rubles.
- Maximum- from 105 thousand rubles.
Pros and cons of the profession of aerial platform and hydraulic lift operator
pros:
- demand in the labor market;
- high level monthly income;
Minuses:
- high responsibility;
- difficult working conditions.
