Connection to Beeline unlimited internet. How to connect and set up mobile Internet on Beeline on your phone? Connect cable Internet Beeline
The life of a modern person is closely connected with the Internet, which allows you to quickly navigate in any situation. Moreover mobile devices are increasingly in demand in a dynamic pace of life than stationary ones. And of course, for all devices to work properly, you need to properly connect and configure the Internet on them.
How to connect mobile Internet to Beeline on your phone?
Typically, the Internet on a cell phone is connected automatically after the first activation of the SIM card. But if the Internet does not work, you need to make sure that the device has Internet access. This service is activated using the request *110*181#.
How to connect unlimited Internet to Beeline for a phone or tablet?
The Beeline operator offers its subscribers to use unlimited Internet at 4G speed on their phone or tablet. Being 5 times faster than its predecessor - 3G. The 4G network is not inferior in speed to Wi-Fi and home wired Internet, allowing you to download information in seconds.
To connect to 4G, you need to purchase a device that supports this speed - an Android phone or tablet, iPhone or iPad. Next, buy a SIM card with 4G support, or exchange an existing card for free at a Beeline salon (the phone number will remain the same). After that, all that remains is to choose the appropriate tariff and additional options. The best solution there will be tariffs.
Another additional service – “Internet for everything” makes it possible to distribute traffic to other devices. You can connect from 2 (prepaid) to 5 (postpaid) additional devices to your Internet traffic package. There are no subscription or connection fees. The service is available for “All” tariffs and the “Highway” option. After the end of traffic, speed increasing services are available on devices - and.
Internet connection on a USB modem
The Internet is connected after connecting the USB modem to the computer. The program located on the modem is automatically activated; you only need to follow the instructions of the installation manager. The basic rule is not to disconnect the modem from the computer until the installation is complete.
If suddenly automatic installation does not occur, you can configure the Internet manually. To do this, in the section "My computer" need to open the disk Beeline, find the file there Autorun.exe and launch it, then, without disconnecting the modem, follow the commands of the installation wizard. Once the installation is complete, a shortcut will appear on your desktop.
Home Internet connection
First of all, you need to find out from the technical support operator whether your house is connected to the Beeline Internet, or find the addresses of connected houses on the official website. After this, you need to sign the agreement at the Beeline office. The connection is free, you just need to pay a subscription fee for a month of Internet use before starting work. After connecting the network cable, the Internet settings are activated automatically. The cable can be connected directly to a computer, or to a Wi-Fi router to distribute the Internet to other devices.
If you still need it additional customization equipment - contact technical support for help or configure it yourself according to the instructions on our website.
Modern tablets and smartphones are practically useless without an Internet connection. As a rule, the network connects automatically when the card is activated. But what if this does not happen? Let's learn how to get settings for your phone and connect to the network yourself.
There are several reasons why there is no network access. The first is that there is no money in the account or free traffic according to the tariff. This is easy to fix: top up your account or select the desired package. The second reason is that the “Internet Access” service from Beeline itself has been disabled. Third – the service is connected, but not configured.
To connect to the network, send an SMS request to connect Beeline Internet. USSD command for free Internet connection on Beeline: * 110 * 181 # . We dial this combination and “Call”. Now the network access service is activated, it remains to be configured correctly. This can be done manually or ordered automatic universal Internet settings on your smartphone.
For automatic settings you can call the number 0880 - it's also free. You will need the code to save the parameters − 1234 .
3G internet
To activate 3G Internet yourself via cellular telephone, you need to do the same as described above. When 3G traffic is activated, it is connected automatically if the subscriber is in the coverage area.
4G internet
The maximum communication speed has become available to Beeline subscribers. 4G and even 4G+ technologies transmit data up to 20 times faster than 3G. Use this high speed internet not everyone can, for this the gadget and SIM card must support 4G. In Beeline offices you can free exchange your old SIM card for a special USIM, and the number is saved. On the operator’s website you can see which smartphones support high-speed coverage.
When the gadget and card are ready, you need to check the settings in the settings. The “Channel Aggregator” must be active, and 4G must be indicated in the “Preferred networks” item. Smartphones often combine two types of connections at once. If your phone has mobile traffic, the most high speed. That is, if the above points are completed, no additional actions are needed.
How to set up Internet on your phone
It’s easier and faster to auto-tune 3G and 4G. If the user is in their coverage area, it connects maximum speed. If for some reason auto-connection does not work, you can enable Mobile Internet Beeline manually.
Setting up on Android
You can set the settings manually on your Android smartphone in a couple of minutes. For this:
- Go to the device settings, find the “Mobile network” item.
- In the “Access Point” section, you need to click on the plus sign or select “New” in the context menu.
- A form will appear that you need to fill out.
In the fields of the questionnaire we write:
- Username: beeline;
- Password: beeline;
- Name "Beeline Internet";
- APN: internet.beeline.ru;
- Authentication type: PAP;
- APN protocol: IPv4.
Setting up for iPhone
You can also quickly set up the Internet for iPhone manually. First, make sure that the “Internet Access” service is activated, which we talked about at the beginning. After this, you can use manual telephone Internet settings. In the gadget settings, go to the “Basic” section, and then “Networks”.
Cost of Internet on Beeline for phone
There are different tariffs for active users of the World Wide Web and those who occasionally visit it. The “Everything” line offers from 1 GB to 10 GB per month for a subscription fee:
- 1 GB – 200 rub.;
- 2 GB – 400 rub.;
- 5 GB – 600 rub.;
- 6 GB – 900 rub.;
- 10 GB – 1500 rub.
Highway service on the phone provides constant access to the network. Is not tariff plan, A additional option from the operator. When the traffic on the tariff is exhausted, additional megabytes are included automatically. The cost of connection is calculated daily or once a month.
How much does mobile Internet cost on Beeline Highway per month:
- 8 GB – 600 RUR;
- 12 GB – 700 RUR;
- 20 GB – 1200 RUR;
- 4 GB – 400 rubles (or 18 rubles per day);
- 1 GB – 200 rubles (or 7 rubles per day).
Rare visitors to the World Wide Web can buy traffic only when they need it. To do this, subscribers are offered to order 100 megabytes for 19 rubles, or 500 megabytes for 29 rubles. Users with unlimited network access can have their speed extended by “Auto speed renewal” options. For every 150 MB, 20 rubles are withdrawn.
The operator may change the prices of Internet options without warning, so the current cost can be found on the company’s website or by phone service center 8-800-700-8378 .
Possible connection problems
The main reason why it does not connect to a mobile phone Internet Android or other OS - lack of traffic. Therefore, first, make sure that there is enough money in your account to pay for the service. It may also not be connected "Three services" package. You need to call , and you will receive a message in response with a list of connected services. If there is no “MMS, gprs and wap”, send a request * 110 * 181 # .
In addition to this, there is another reason why the Internet does not work if it is connected. The phone itself may have “Data transfer” function is disabled. In settings mobile network you need to check and tick or “OK” this item. After trying to connect to the network, reboot the gadget. If there is still no access, you can consult the operator (number: 0611 ).
How to find out what Internet is connected to Beeline
The easiest way is to monitor your tariff and traffic in or through the application. For those who do not have such accounts, you can call
Setting up a connection using the program:
The beta program automatically creates a VPN- L2TP connection— you will only need to enter your login and password from the subscriber card, the program will do the rest on its own. This program will work correctly on Windows 2000 or higher.
2. Once the installation is complete, you will be prompted to restart your computer. Select "Yes, reboot now" and press the button Complete.
3. After rebooting to work. A Beeline Internet connection shortcut will be created on the table, launch it by double-clicking the left mouse button. The basic connection settings window will open, enter your Username And password, press the button To plug. In a few seconds the connection will be established and you will be able to surf the Internet!
Manual setup of Beeline Internet for Windows 7
Setting up Beeline local network on PC
1. Click the button Net and select .
2. In the window that opens, left-click on
3. Click the icon Connection via local network , right-click and select Properties.
4. Remove the check mark from Internet Protocol Version 6 (TCP/IPv6) (1). Check the item Internet Protocol Version 4 (TCP/IPv4) (2) and press the button Properties (3). Check off the items (4) And (5) , as shown in the picture. Click the button OK (6). The local network setup is complete!
Setting up a Beeline Internet connection (VPN):
1. Click the button Net and select Network and Sharing Center.
2. Select an item Setting up a new connection or network. Select Connection to the workplace. Click the button Further.
3. When asked how to connect, select Use my Internet connection (VPN). Click the button Further. If you get an offer window Set up an Internet connection Before continuing, please select Postpone Internet connection setup
4. Internet address- enter tp.internet.beeline.ru , Destination name- enter Beeline Check the box next to the item Don't connect now, only install to connect in the future. Click the button Further.
5. User— enter your login in this field (by default, this is your personal account number starting with 089) Password-enter your password here. For your convenience, check the boxes Show entered characters And Remember Password ( So as not to type it every time you connect to the Internet ) . You do not need to enter anything in the Domain field. Click the button Create.
In the next window "The connection is ready to use" click the button Close! (You don’t need to click the connect button now)
6. Select an item Change adapter settings.
7. Find the connection you just created Beeline, right-click on it and select properties. In the General tab, check that the VPN server address is tp.internet.beeline.ru
8. Go to the tab Options, uncheck the box next to the item Enable login domain in Windows.
9. In the tab Safety set VPN Type - L2TP IPSec VPN Data encryption: optional (connect even without encryption). Allow the following protocols - CHAP Password Authentication Protocol. Remove the remaining checkboxes. Click OK.
10. Click on the Beeline icon twice with the left mouse button. Enter your username and password. Check the box "Save username and password" Click Connection, after 3-10 seconds. You will connect to Beeline Internet, after connecting the system will ask you to select a connection location - select "Home network".
11 . To place a Beeline connection shortcut on your desktop, right-click on the connection Beeline and select the menu item "Create shortcut", the system will ask you "Create a shortcut on the desktop" press YES. Now you can establish a connection directly from your desktop.
Can't figure it out on your own?! Feel free to ask questions in the comments.
p.s. You haven’t connected your home in Saratov yet, call us at the numbers listed at the top of the site and we will help you!
In this article we will look at setting up a beeline Internet connection...
Set up a beeline Internet connection for Windows 7
1. Click the button Start(bottom left corner), select Control Panel. The Control Panel window will open, in the Network and Internet section, select the item.
2. Select an item Setting up a new connection or network.
3. Select Connection to the workplace. Click the button Further.
4. When asked how to connect, select . Click "Next. If you are prompted to Set up your Internet connection before continuing, select Defer Internet connection setup
5.
Internet address - enter tp.internet.beeline.ru
Destination name - enter Beeline
. Click the button Further.
6.
User - in this field Enter your login.
Password - you need it here enter your password.
For your convenience, check the boxes Show entered characters And Remember Password.
Click the button Create.
7. Connection is ready, press the button Close.
8. Select an item Change adapter settings.
9. Find the connection you just created (Beeline), right-click on it and select properties. In the tab General make sure that the VPN server address is tp.internet.beeline.ru.
10. Go to the tab Options, uncheck opposite the point Enable login domain in Windows.
11. In the tab Safety select VPN type - L2TP IPSec VPN
Data encryption- select optional
Allow the following protocols- Password verification protocol CHAP.
Click the button OK.
12. Click on the connection (Beeline) twice with the left mouse button. Enter your username and password. Click the Connect button, after a few seconds you will connect to the Internet, after the connection is established, the system will ask you to select a connection location - select \”Public Place\”.
Set up a beeline Internet connection for Windows Vista
1. Click the button Start and select Settings → Control Panel.
2. The Control Panel will open in front of you, we need to find the Network and Internet section and click on the item View network status and tasks.
3. To create a VPN connection, click on the item Establishing a connection or network.
4. Select an item Connection to the workplace and press the button Further.
5. Click on an item Use my Internet connection (VPN).
6. If you are prompted to set up your Internet connection before continuing, select Postpone Internet connection setup.
7. In this window you need to enter the following data:
Internet address - tp.internet.beeline.ru
Destination name - Beeline
Check the box next to the item Don't connect now, only install to connect in the future.
Click the button Further.
8.
Enter your registration details:
User: in this field enter your login for Internet access
Password: in this field you need to enter a password to access the Internet
For your convenience, check the boxes next to the items Display characters entered and Remember this password.
Click the button Create.
9. Connection created, click button Close.
10. Select an item Connect to the network, a list with available connections will open in front of you. Select Beeline And click on it right click, in the menu that appears, select Properties.
11. The connection properties will open in front of you. In the tab Are common make sure the VPN server address is tp.internet.beeline.ru.
Help create automatically VPN connection via L2TP protocol can program Setup Wizard. After installation, you will only need to enter a password and username (login), the program will perform all the necessary settings itself. Link to download the program.
For connecting multiple computers or laptops to the Internet use router (router).
Setting up a local network wired internet Beeline for Windows XP
1. To set up a local network connection, open the window Network Connections: Start > Control Panel >, then click on the icon Network connections.
2. The window opened Network connections.Now select the icon LAN connection and, if your network cable and equipment are in good condition and all the necessary drivers are installed, then it will be in a state Connected. Double-click on this icon with the left mouse button, and in the window that opens, click the button Properties.
4. You should check the box Obtain an IP address automatically, and Obtain DNS server address automatically and press the button OK.
Setting up an Internet connection for Beeline wired Internet for Windows XP
2. To unpack the file you downloaded, right-click on it and select Open with - Compressed ZIP folders.
3. When you run this file, the system will definitely ask for permission to make changes, agree and click Execute. Now that the file has made the necessary changes, you need to restart your computer for these changes to take effect.
4. After the system reboots, click on the button Start, go to Control Panel, where select the item Network and Internet connections and click on the icon Network connections.
5. In the window that opens, select Creating a new connection(on the left in the menu Network tasks) and click on it.
6. A window should open for you New Connection Wizard. In it, click Further.
8. Do you need an item Connecting to a virtual private network, click Further.
9. In the Organization field you need to enter a name for this connection, type Beeline and press Further.
10. In field Computer name or IP address you need to enter the following: , press Further.
11. Check the box Add a shortcut to your desktop and press Ready.
12. Double-click on the created connection with the left mouse button Beeline and select Properties.
13. The connection properties window will open. Here you need to check what is in the line Destination computer name or IP address The VPN server address was entered correctly, i.e.
14. Going to the tab Safety, You must arrange the items as indicated in this picture.
16. Now the required connection along with the necessary settings has been created and all you have to do is enter your login, password specified in the agreement, and click on the button To plug. If you have done everything correctly and you have paid for the Internet, the connection will be established and you can begin browsing the Internet.
How configure the connection for other versions operating system Windows and Apple Mac OS users can be found at
