Job description of the chief project engineer (design organization specialist). Provisions of the job description of the chief engineer of the project Job description of the chief engineer of the project in transport

Answer to the question:

In response to your request, we will send samples of job descriptions; if necessary, you can adapt it taking into account the specifics of your organization.

Limited Liability Company "Alfa"

Job description No. 18

chief engineer of the project, taking into account the requirements of Federal Law dated July 3, 2016 No. 372-FZ

Moscow 03/14/2014

1. GENERAL PROVISIONS

1.1. The chief engineer of the project belongs to the category of managers.

1.2. The chief engineer of the project is appointed to the position on a competitive basis in order to organize the development of design estimates, tender and other documentation necessary for construction and management of design and survey work, throughout the entire period of preliminary feasibility assessments and investment calculations, bidding, conclusion of an agreement with the customer, design, construction, commissioning of the facility and development of design capacities.

1.3. The decision on appointment to the position of chief engineer of the project and on dismissal from the position is made by the General Director.

1.4. A person with a higher professional education in the specialty “Building Design” or higher professional education and professional retraining in the field of professional activity is appointed to the position of chief engineer of the project; work experience in the field of professional activity for at least 10 years; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held, information about which is included in the national register of specialists in the field of engineering surveys and architectural and construction design or in the national register of specialists in the field of construction.

1.5. The chief project engineer must know:

– legislative acts, regulatory legal and administrative documents, international and state standards, technical specifications and other materials on the development and execution of design estimates and other technical documentation, catalogs of design documentation for mass use, technical regulations, building codes and regulations, regulatory documents of government bodies supervision, other regulatory materials in relation to the specialization of the position;
– prospects for technical, economic and social development of the industry;
– economics and organization of construction, labor and management;
– basics of copyright and patent law;
– requirements for environmental protection and environmental safety;
– basics of labor legislation, rules and regulations of labor protection, safety precautions, industrial sanitation and fire protection;
– best practices in design and construction;
– organization, planning, economics of design and engineering surveys;
– design methods, automation tools for design work;
– modern technical means for designing and performing computational work;
– certification procedure;
– profile, specialization and features of the enterprise structure;
– market methods of managing and managing an enterprise, its business plan;
– technical, economic, environmental and social requirements for the designed facilities;
– the procedure for concluding and executing economic and financial contracts, contracts for the creation (transfer) of scientific and technical products.

1.6. The chief engineer of the project is guided in his activities by:

– current legislation, regulatory materials on the design, construction and operation of facilities;
– The charter of the enterprise, local regulatory legal acts, regulatory and administrative documents issued by the head of the organization;

1.7. The chief project engineer reports directly to the general director.

1.8. During the absence of the chief engineer of the project (vacation, illness, etc.), his duties are performed by a person appointed by order of the general director, who acquires the corresponding rights and is responsible for the improper performance of the duties assigned to him.

2. FUNCTIONS AND TASKS

2.1. The chief project engineer performs the following functions:

– ensures planning of the enterprise’s activities on issues within its competence;
– organizes the preparation of a calendar plan for the development of design and other documentation for construction, calendar plans for the production of scientific and technical products;
– participates in the development and scheduling of research, design, engineering and technological work for facilities where new technological processes and equipment with a long development, design and manufacturing cycle will be used;
– coordinates design and survey work throughout the entire project complex, including:

1) preparation and approval of assignments for the performance of engineering survey work, assignments for the preparation of design documentation for a capital construction project;

2) determines the criteria for selecting participants in the work of performing engineering surveys, preparing design documentation and selecting performers of such work, as well as for coordinating the activities of performers of such work;

3) presentation, approval and acceptance of the results of work on performing engineering surveys and preparing design documentation;

4) takes part in the approval of the results of engineering surveys and design documentation;
– monitors the compliance of the technical and economic level of the adopted design decisions with the established requirements, the economical expenditure of funds for design and survey work, the timeliness of the development of design and estimate documentation, and the implementation of design and survey work;
– controls the timeliness of placing orders for the supply of equipment and materials, organizing their acceptance, filing, if necessary, claims against manufacturers and suppliers;
– organizes monitoring of the progress of work on the implementation of the project;
– exercises control over the activities of subcontractors as they relate to it;
– organizes work to verify the patent purity of technological processes, equipment, structures, materials and products first used or developed on the project;
– analyzes and summarizes the experience of design, construction and operation of constructed facilities, and prepares, on this basis, proposals to improve the technical level and economic efficiency of design solutions.

2.2. In accordance with the functions performed, the chief project engineer solves the following tasks:

– takes the necessary measures to ensure the required dynamics of investments and income from the project;
– ensures compliance with norms and standards for the design, construction and operation of facilities;
– ensures the practical application of advanced scientific and technical achievements and the introduction of advanced technologies to ensure the competitiveness of the enterprise in the domestic market.

3. JOB RESPONSIBILITIES

3.1. Participates in tenders (auctions) held by the customer when placing an order for the design of facilities.

3.2. Prepares data for concluding an agreement with the customer for the performance of design and survey work and the provision of engineering and consulting services, including the stages of development, the composition and volume of documentation for construction, the conditions for insuring risks associated with the development of the project and its implementation, justification of contractual prices, copyright and intellectual property protection, confidentiality conditions.

3.3. If necessary, participates in determining the composition of project participants, including subcontractor design and survey organizations.

3.4. Provides a high technical and economic level of designed objects based on the use of the latest achievements of science and technology, the most appropriate and economical design solutions.

3.5. Ensures compliance of the developed design and estimate documentation with urban planning and other norms, state standards, rules and instructions.

3.6. Ensures that projects comply with the design specifications and working documentation.

3.7. Provides technical management of design and survey work during the design of the facility and supervision of its construction, commissioning and development of design capacities.

3.8. Takes measures aimed at improving the quality of design and estimate documentation and reducing the consumption of material resources during the construction of facilities, reducing the cost of their operation.

3.9. Organizes the preparation of the necessary documents to obtain permission for the construction (reconstruction) of the facility.

3.10. Receives a conclusion on the compliance of project documentation with the requirements of technical regulations from the examination bodies, carries out the necessary approvals with state authorities and local governments.

3.11. Participates in the work of commissions for the selection of sites (routes) for construction, in the preparation of design assignments and in the organization of engineering surveys for the development of design estimates and other technical documentation.

3.12. Forms assignments for subcontractors to perform the work entrusted to them and provides these organizations with the necessary initial data, resolves issues that arise during the development of documentation.

3.13. Prepares motivated proposals for the customer to make changes to the working documentation.

3.14. Provides technical conditions for connecting the facility to engineering support networks.

3.15. Provides timely resolution of issues arising during the construction process, commissioning of the facility and development of design capacities.

3.16. Organizes work to eliminate detected defects in design estimates and other technical documentation, as well as to record the expenditure of approved estimates.

3.17. Conducts the necessary approvals with state supervisory authorities and other organizations of justified deviations from current norms, rules, and instructions.

3.18. Takes part in the examination of projects, draws up applications for inventions, and prepares conclusions on rationalization proposals.

3.19. Prepares and approves assignments for the performance of engineering survey work, assignments for the preparation of design documentation for a capital construction project;

3.20. Presents, coordinates and accepts the results of engineering surveys and preparation of design documentation;

3.21. Approves the results of engineering surveys and design documentation.

The chief engineer of the project has the right.

4.1. Represent the design organization in institutions, organizations and enterprises on the development, coordination and review of design and other documentation for construction, manufacture and supply of equipment and materials, construction and development of design capacities.

4.2. Make decisions and conduct correspondence over your signature on issues of technical and economic assessments and investment calculations, bidding, concluding an agreement with the customer, design, construction, commissioning of the facility and development of design capacities.

4.3. Conduct negotiations and enter into preliminary agreements with the customer upon receipt of an order for the design and construction of a facility, including the contract price and other conditions for the work.

4.4. Make decisions about the formation of a reserve of funds and its use.

4.5. Conduct additional inspection or testing of structures, carry out quality checks on any part of the structure.

4.6. Suspend construction and installation works if they are carried out with deviations from the project, if technical conditions and rules for the production of these works are violated, as well as if their quality is unsatisfactory.

4.7. Prohibit the use of any materials and equipment that do not meet the established requirements.

5. RESPONSIBILITY

The chief engineer of the project is responsible.

5.1. For the low technical and economic level of objects under construction, the low level of architectural decisions made.

5.2. For poor quality and untimely development of construction documentation.

5.3. For failure to fulfill or improper fulfillment of contractual obligations.

5.4. For failure to fulfill or improper performance of the duties assigned to him, non-use of official rights within the limits determined by the current legislation of the Russian Federation.

The job description was developed in accordance with the order of the General Director dated February 14, 2014 No. 15.

AGREED

Head of HR Department ____________ E.E. Gromova

Chief engineer of the project ____________ V.K. Volkov

Job Description No. 226
chief architect taking into account the requirements of Federal Law dated July 3, 2016 No. 372-FZ

Moscow 03/14/2014

1. GENERAL PROVISIONS

1.1. This job description defines the duties, rights and responsibilities of the chief architect.

1.2. The decision on appointment and dismissal is made general director.

1.3. A person with a higher professional education in the specialty "Architecture" or higher professional education and professional retraining in the direction of "Architecture" is appointed to the position of chief architect; work experience in the field of professional activity for at least 10 years; advanced training at least once every 5 years and the availability of a qualification certificate for compliance with the position held, information about which is included in the national register of specialists in the field of engineering surveys and architectural and construction design.

1.4. The chief architect in his activities is guided by: – current regulatory and technical documents;

– charter of the organization, local regulations organizations;

– this job description.

1.5. The chief architect must know:

– laws and other regulations of the Russian Federation related to architecture and urban planning;

– environmental protection requirements;
– administrative, normative and methodological documents on design, construction,
operation or restoration (reconstruction, restoration) of objects;
– the procedure for concluding and executing contracts of the organization;
– technical, environmental, socio-economic and aesthetic requirements for objects
architecture;
– the specifics of regional and local natural, economic, environmental, social and
other conditions for the implementation of urban planning and architectural solutions;

– technology of design, construction and operation of architectural objects;
– methods of design and carrying out technical and economic calculations;
– types and properties of building materials and structures used in construction;

The procedure for conducting environmental impact assessment;
– trends in the development of architecture and construction;
– technical conditions, standards and other requirements for the development and execution of design and estimate documentation;
– the procedure for coordination and approval of design and estimate documentation;
– modern hardware and software design tools ( 3D MAX, AutoCAD, ArchiCAD, CorelDraw, Photoshop, Illustrator, Urbanictica, etc.);
– technical English (fluent reading and translation of specialized literature);
– Labor regulations;
– rules and regulations of labor protection, safety and fire protection.

1.6. The chief architect reports to to CEO.

1.7. During the absence of the chief architect (vacation, illness, etc.), his duties are performed by
a person appointed in accordance with the established procedure.

2. JOB RESPONSIBILITIES

The chief architect is responsible for:

2.1. Realize:
– technical management of design and survey work during the design of the facility and
designer's supervision of its construction, commissioning and development of design capacities;
– control over the technical level of accepted design, urban planning and architectural
planning decisions, economical spending of funds on design and survey
work, timing of development of design and estimate documentation.

2.2. Provide:
– high technical and economic level of the designed objects (based on the use
achievements of science and technology, the most economical design solutions);
– compliance of the developed design and estimate documentation with technical regulations,
standards, norms, rules and instructions;
– checking for patent purity and patentability of those first used in the project or
technological processes, equipment, instruments, structures developed for it,
materials and products.

2.3. Take measures aimed at improving the quality of design estimates and
reducing the consumption of material resources during the construction of facilities, reducing their cost
operation based on improving the quality of design, urban planning and architectural
planning decisions.

2.4. Prepare data for concluding contracts with customers for the development (transfer) of scientific-
technical products.

2.5. Participate:
– in the work of commissions for selecting sites (routes) for construction, in preparing assignments for
design and organization of engineering surveys for the development of design estimates and
other technical documentation;
– in drawing up comprehensive plans and schedules for the implementation of research,
design, engineering and technological work for facilities where there will be
apply new technological processes and equipment with a long development cycle,
design and manufacturing.
– in drawing up calendar plans for the production of scientific and technical products.

2.6. Prepare justification for the cost of design work.

2.7. Develop proposals on the composition of project developers, distribute among them
assignments for sections and parts of the project, volumes and costs of work.

2.8. Formulate tasks for subcontractors to perform the work entrusted to them and
provide these organizations with the necessary input data.

2.9. Resolve technical issues that arise for subcontractors during the process
documentation development, as well as financial issues arising during the design process
construction, commissioning of the facility, development of design capacities.

2.10. Protect the project in higher organizations and examination bodies.

2.11. Organize work to eliminate detected defects in design estimates and other
technical documentation, as well as accounting for the expenditure of approved estimates.

2.11.1 Organization of incoming control of design documentation for capital construction projects.

2.12. Ready:
– proposals to management and the customer to make changes to the working documentation,
related to the introduction of new regulatory documents, taking into account the actual state
construction;
– reviews and conclusions on rationalization proposals and inventions, draft standards,
technical specifications and other regulatory documents related to the design and
construction.

2.13. Coordinate reasonable deviations from current norms, rules, instructions with
state supervisory authorities and other organizations that approved them.

2.14. Provide analysis and synthesis of experience in design, construction and operation
constructed facilities and preparation on this basis of proposals to improve technical and
economic level of design solutions.

2.15. Take part in the examination of projects, preparation of publications and preparation of applications for
inventions, in the work of seminars and conferences in their specialty.

2.16. Promptly plan, coordinate, organize and carry out construction control during the construction, reconstruction, and major repairs of capital construction projects.

2.17 Accept completed types and individual stages of work on construction, reconstruction, major repairs of capital construction projects, elements, structures and parts of capital construction projects, engineering support networks, their sections with the right to sign the relevant documents;

2.18. Sign the following documents:

2.19. Manage department employees.

The chief architect has the right:

3.1. Get acquainted with the design decisions of the organization’s management relating to it
activities.

3.2. Make proposals for improving work related to the provided
obligations under this instruction.

3.3. Within your competence, inform your immediate supervisor about shortcomings,
identified during the performance of official duties, and make proposals for them
elimination.

3.4. Require the management of the organization to provide assistance in the performance of their duties
responsibilities and rights.

3.5. Request personally or through your immediate supervisor information and documents,
necessary to perform their job duties.

3.6. Attract with the permission of the organization's management all employees (separate)
structural units to solve the tasks assigned to it.

3.7. Distribute responsibilities between department employees and draw up their job descriptions
instructions and monitor their implementation.

3.8. Prepare proposals:
– on encouraging department employees who have distinguished themselves in solving issues within their
competence;
– on the imposition of disciplinary sanctions on department employees for non-compliance and
improper performance of their official duties.

3.9. Sign and endorse:
– internal documents (memos, internal correspondence, reports,
performances, etc.);
– documents of external correspondence within its competence.

3.10. Distribute bonuses among department employees within the allocated funds.

4. RESPONSIBILITY

The chief architect is responsible for:

4.1. For improper performance or failure to fulfill one’s official duties,
provided for by this job description, within the limits determined by the current
labor legislation of the Russian Federation.

4.2. For violations committed in the course of carrying out its activities, within the limits
determined by current administrative, criminal and civil legislation
Russian Federation.

4.3. For causing material damage within the limits determined by the current labor and
civil legislation of the Russian Federation.

5. PROCEDURE FOR REVISING THE JOB DESCRIPTION

5.1. The job description is reviewed, amended and supplemented as
necessity, but at least once every five years.

5.2. The order to make changes (additions) to the job description is read under
receipt for all employees organizations, to which this instruction applies.

The job description was developed in accordance with the order general director from 14
February 2014 No. 67.

AGREED

Head of HR Department E.E. Gromova

14.03.2014

I have read these instructions.
I received one copy in my hands and undertake to keep it at my workplace.

Main architector P.A. Bespalov

14.03.2014

Details in the materials of the Personnel System:

1.Answer: How to write a job description

N.Z. Kovyazina

Regardless of the format, the job description usually consists of the following sections:

© Material from KSS “System Personnel”
Ready-made solutions for personnel services at www.1kadry.ru
Copy date: 06/16/2017

Legal basis:

Federal Law of July 3, 2016 No. 372-FZ

On amendments to the Town Planning Code of the Russian Federation and certain legislative acts of the Russian Federation

Article 1

Introduce into the Town Planning Code of the Russian Federation (Collected Legislation of the Russian Federation, 2005, No. 1, Art. 16; 2006, No. 1, Art. 10, 21; No. 31, Art. 3442; No. 52, Art. 5498; 2007, No. 1 , Art. 21; No. 31, Art. 4012; No. 46, Art. 5553; No. 50, Art. 6237; 2008, No. 20, Art. 2251, 2260; No. 29, Art. 3418; No. 30, Art. 3604 , 3616; 2009, No. 48, Art. 5711; 2010, No. 31, Art. 4195, 4209; No. 48, Art. 6246; No. 49, Art. 6410; 2011, No. 13, Art. 1688; No. 14, Art. .1651; No. 17, Art. 2310; No. 27, Art. 3880; No. 29, Art. 4281; No. 30, Art. 4563, 4590, 4591, 4594; No. 49, Art. 7015; 2012, No. 26, Art. .3446; No. 30, Art. 4171; No. 31, Art. 4322; No. 47, Art. 6390; No. 53, Art. 7614, 7619, 7643; 2013, No. 9, Art. 874; No. 14, Art. 1651 ; No. 23, Art. 2871; No. 27, Art. 3477, 3480; No. 30, Art. 4040, 4080; No. 43, Art. 5452; No. 52, Art. 6983; 2014, No. 14, Art. 1557; No. 16, Art. 1837; No. 19, Art. 2336; No. 26, Art. 3377, 3386; No. 27, Art. 3880; No. 30, Art. 4218, 4220, 4225; No. 43, Art. 5799, 5804; No. 48, Article 6640; 2015, No. 1, Article 9, 11; No. 27, Article 3967; No. 29, Article 4339, 4342, 4350, 4378, 4389; No. 48, Article 6705; 2016, No. 1 , Art. 79) the following changes:

…

16) Article 55.5 shall be stated as follows:

"Article 55.5. Standards and internal documents of a self-regulatory organization

1. Before entering information about it into the state register of self-regulatory organizations, a non-profit organization is obliged to develop and approve the documents provided for by the legislation of the Russian Federation on non-profit organizations and the Federal Law “On Self-Regulatory Organizations”, as well as the following internal documents of the self-regulatory organization:

1) on the compensation fund for damages;

2) on the compensation fund for securing contractual obligations (in the cases provided for in parts 2 and 4 of Article 55.4 of this Code);

3) on the register of members of a self-regulatory organization;

4) on the procedure for considering complaints about the actions (inaction) of members of the self-regulatory organization and other appeals received by the self-regulatory organization;

5) on the self-regulatory organization conducting an analysis of the activities of its members based on the information provided by them in the form of reports;

6) on membership in a self-regulatory organization, including on the requirements for members of a self-regulatory organization, on the amount, procedure for calculating and paying the entrance fee, membership fees.

2. A self-regulatory organization may develop and approve internal documents:

1) on insurance by members of a self-regulatory organization of the risk of civil liability that may occur in the event of harm due to deficiencies in work that affect the safety of capital construction projects, on the conditions of such insurance;

2) on insurance of the risk of liability for violation by members of a self-regulatory organization of the terms of a contract for engineering surveys, for the preparation of design documentation, a construction contract, as well as the terms of such insurance;

3) other internal documents.

3. Internal documents of a self-regulatory organization, provided for in parts 1 and 2 of this article, cannot contradict the legislation of the Russian Federation and the charter of a non-profit organization.

4. A self-regulatory organization in the course of its activities, in addition to the standards provided for by the Federal Law “On Self-Regulatory Organizations” (hereinafter referred to as the standards of a self-regulatory organization), within a period of no later than three months from the date of assignment of the status of a self-regulatory organization, approves the qualification standards of the self-regulatory organization in the relevant field of activity .

5. Qualification standards of a self-regulatory organization are internal documents of a self-regulatory organization and determine the qualification characteristics (required level of knowledge and skills, level of independence in performing a job function, differentiated depending on the area of ​​activity) necessary for employees to carry out job functions of performing engineering surveys, preparing design documentation, construction, reconstruction, major repairs of capital construction projects.

6. The requirements for members of a self-regulatory organization established in the standards of the self-regulatory organization and in the internal documents of the self-regulatory organization cannot be lower than the minimum established in this part:

1) qualification requirements for individual entrepreneurs, as well as managers of a legal entity, independently organizing the implementation of engineering surveys, preparation of design documentation, construction, reconstruction, major repairs of capital construction projects - the presence of a higher education in the relevant field and work experience in the specialty of at least five years ;

2) requirements for an individual entrepreneur or legal entity to have specialists in organizing engineering surveys (chief project engineers), specialists in organizing architectural and construction design (chief project engineers, chief project architects), specialists in organizing construction (chief project engineers), labor whose function includes, respectively, organizing the execution of engineering survey work, the execution of work on the preparation of design documentation, construction work, reconstruction, major repairs of capital construction projects and information about which is included in the national registers of specialists provided for in Article 55.5-1 of this Code (hereinafter also referred to as - specialists) - at least two specialists at the place of main work.

7. The requirement for the minimum number of specialists of an individual entrepreneur or legal entity at the place of main work may be increased by a self-regulatory organization, including if it is necessary for such specialists to perform a labor function, including organizing the execution of engineering survey work, the preparation of project documentation in relation to cultural heritage sites for the purpose of preservation of such objects, as well as, if necessary, the implementation of labor functions by such specialists, including the organization of work on engineering surveys, preparation of design documentation, construction, reconstruction, major repairs of capital construction projects, depending on their technical complexity and potential danger, on the cost of one contract agreements for engineering surveys, preparation of design documentation, construction contracts.

8. Requirements for members of a self-regulatory organization performing engineering surveys, preparing design documentation, construction, reconstruction, major repairs of particularly dangerous, technically complex and unique objects, differentiated taking into account the technical complexity and potential danger of such objects, are established in the internal documents of the self-regulatory organization and cannot be lower than the minimum established by the Government of the Russian Federation.

9. The standards of a self-regulatory organization and internal documents cannot contradict this Code, the legislation of the Russian Federation on technical regulation, as well as standards for the processes of performing engineering survey work, preparing project documentation, construction, reconstruction, major repairs of capital construction projects, approved by the relevant National Association self-regulatory organizations.

10. The standards of a self-regulatory organization and internal documents of a self-regulatory organization are approved by the permanent collegial governing body of the self-regulatory organization, with the exception of internal documents, the approval of which falls within the exclusive competence of the general meeting of members of the self-regulatory organization. The standards of a self-regulatory organization and internal documents of a self-regulatory organization are mandatory for all its members, their specialists and other employees.

11. The procedure for developing standards of a self-regulatory organization and internal documents of a self-regulatory organization is determined by the self-regulatory organization independently in compliance with the requirements established by this article.

12. Internal documents of a self-regulatory organization, provided for in parts 1 and 4 of this article, the development and approval of which by a self-regulatory organization are mandatory; changes made to such documents, decisions to invalidate such documents come into force no earlier than from the date information about them is entered to the state register of self-regulatory organizations in accordance with Part 5 of Article 55.18 of this Code.

13. Internal documents of a self-regulatory organization provided for in Part 2 of this article, changes made to these documents, decisions to recognize such documents as invalid shall come into force no earlier than ten days after the day of their adoption.

14. Internal documents of a self-regulatory organization provided for in parts 1, 2 and 4 of this article, changes made to these documents, decisions made by the permanent collegial management body of a self-regulatory organization are subject to posting within no later than three working days from the date of their adoption on the website of this self-regulatory organization on the Internet and in the direction (with the exception of decisions made by the permanent collegial management body of the self-regulatory organization in relation to members of the self-regulatory organization) on paper or in the form of electronic documents (a package of electronic documents) signed by the self-regulatory organization using enhanced qualified electronic signature, to the supervisory authority for self-regulatory organizations.";

17) add Article 55.5-1 with the following content:

"Article 55.5-1. Specialists in organizing engineering surveys, specialists in organizing architectural and construction design, specialists in organizing construction

1. A specialist in organizing engineering surveys, a specialist in organizing architectural and construction design, a specialist in organizing construction is an individual who has the right to carry out, under an employment contract concluded with an individual entrepreneur or legal entity, labor functions in organizing the execution of engineering survey work, preparation of design documentation, construction, reconstruction, major repairs of a capital construction project in the position of chief engineer of the project, chief architect of the project and information about which is included in the national register of specialists in the field of engineering surveys and architectural and construction design or in the national register of specialists in the field of construction.

2. Specialists in the organization of engineering surveys, specialists in the organization of architectural and construction design, information about which is included in the national register of specialists in the field of engineering surveys and architectural and construction design, are engaged by an individual entrepreneur or a legal entity under an employment contract in order to organize the execution of work according to engineering surveys, preparation of design documentation.

3. The job responsibilities of specialists in organizing engineering surveys and specialists in organizing architectural and construction design include, respectively:

1) preparation and approval of assignments for the performance of engineering survey work, assignments for the preparation of design documentation for a capital construction project;

2) determining criteria for selecting participants in the work of performing engineering surveys, preparing design documentation and selecting performers of such work, as well as coordinating the activities of performers of such work;

3) presentation, approval and acceptance of the results of work on performing engineering surveys and preparing design documentation;

4) approval of the results of engineering surveys and design documentation.

4. Specialists in the organization of construction, information about which is included in the national register of specialists in the field of construction, are engaged by an individual entrepreneur or a legal entity under an employment contract in order to organize the execution of work on construction, reconstruction, and major repairs of capital construction projects.

5. The job responsibilities of construction management specialists include:

1) organization of incoming control of design documentation for capital construction projects;

2) operational planning, coordination, organization and conduct of construction control in the process of construction, reconstruction, major repairs of capital construction projects;

3) acceptance of completed types and individual stages of work on construction, reconstruction, major repairs of capital construction projects, elements, structures and parts of capital construction projects, engineering support networks, their sections with the right to sign the relevant documents;

4) signing the following documents:

a) act of acceptance of a capital construction project;

b) a document confirming the compliance of the constructed or reconstructed capital construction facility with the requirements of technical regulations;

c) a document confirming the compliance of the parameters of the constructed or reconstructed capital construction facility with the design documentation, including the requirements for energy efficiency and the requirements for equipping the capital construction facility with metering devices for the energy resources used;

d) a document confirming the compliance of the constructed or reconstructed capital construction facility with the technical conditions for connection (technological connection) to engineering support networks (if any).

6. Information about the individual specified in Part 1 of this article is included by the relevant National Association of Self-Regulatory Organizations, respectively, in the national register of specialists in the field of engineering surveys and architectural and construction design, in the national register of specialists in the field of construction (hereinafter also referred to as national registers of specialists) based on the application of such a person, provided that he meets the following minimum requirements:

1) presence of higher education in a profession, specialty or area of ​​training in the field of construction;

2) the presence of work experience, respectively, in organizations performing engineering surveys, preparing design documentation, construction, reconstruction, major repairs of capital construction projects in engineering positions for at least three years;

3) having a total work experience in the profession, specialty or area of ​​training in the field of construction of at least ten years;

4) advanced training of a specialist in the field of training in the field of construction at least once every five years;

5) availability of a work permit (for foreign citizens).

7. The procedure for including information about an individual in national registers of specialists and their exclusion from such registers, as well as the list of areas of training in the field of construction, is approved by the federal executive body exercising the functions of developing and implementing state policy and legal regulation in the field of construction, architecture, urban planning.

8. The National Association of Self-Regulatory Organizations denies an individual the inclusion of information about him in the national register of specialists in the case of:

1) such person does not meet the requirements established by part 6 of this article;

2) establishing the fact of submission of documents containing false information;

3) such an individual has an outstanding or unexpunged conviction for committing an intentional crime;

4) the presence in relation to such an individual of decisions to exclude information about him from the national register of specialists on the grounds specified in paragraphs 3-5 of part 9 of this article, taken for a period of no more than three years preceding the date of filing the application specified in part 6 of this articles;

5) the presence in relation to such an individual of decisions to exclude information about him from the national register of specialists, taken for a period of at least two years preceding the date of filing the application specified in part 6 of this article.

9. Information about the individual specified in part 1 of this article is excluded from the national register of specialists:

1) based on an application from such an individual;

2) in connection with the death of such an individual (including on the basis of an application from a self-regulatory organization);

3) if, due to the fault of such an individual, payments were made from the compensation funds of a self-regulatory organization and the guilt of this specialist was established by a court (including on the basis of an appeal from a self-regulatory organization);

4) in the event that such an individual is brought to administrative responsibility two or more times for similar offenses committed during the performance of engineering surveys, preparation of project documentation in relation to one capital construction project, committed during the construction, reconstruction, major repairs of one capital construction project (in including on the basis of an appeal from a self-regulatory organization);

5) if an individual entrepreneur or a legal entity whose employee is such an individual, through the fault of such an individual, is included in the register of unscrupulous suppliers (contractors, performers) and the guilt of such an individual is established by a court (based on the application of such an individual entrepreneur or such a legal entity) ;

6) upon expiration of the foreign citizen’s temporary residence permit in the Russian Federation and the validity period of his work permit.

10. Maintaining the national register of specialists in the field of engineering surveys and architectural and construction design, the national register of specialists in the field of construction is carried out by the relevant National Association of Self-Regulatory Organizations.

11. National registers of specialists must contain the following information:

1) last name, first name, patronymic (if any) of the individual;

2) the type of work carried out by an individual (organization of work on engineering surveys, on the preparation of design documentation, on construction, reconstruction, major repairs of capital construction projects);

3) the date of the decision to include information about an individual in the national register of specialists or the date of the decision to exclude information about such an individual from the national register of specialists.

12. Information contained in the national register of specialists must be posted on the website of the relevant National Association of Self-Regulatory Organizations on the Internet and must be available for review without charging a fee.

13. The procedure for maintaining national registers of specialists, the procedure for making changes to information about individuals included in such registers, are established by the federal executive body exercising the functions of developing and implementing state policy and legal regulation in the field of construction, architecture, and urban planning." ;

Article 9

1. This Federal Law comes into force on July 1, 2017, with the exception of certain provisions of this Federal Law, for which this article provides for a different date for their entry into force.

2. Clause 7, subparagraphs "d" and "e" of paragraph 13, paragraphs 15, 28, 29, subparagraph "a", paragraphs five - seven of subparagraph "b", subparagraphs "c" and "d" of paragraph 30, paragraph 31 , subparagraph "c" of paragraph 32, subparagraphs "c" and "d" of paragraph 33 of Article 1, Article 6, Part 1 of Article 7, Parts 1, 2, 4 and 5 of Article 8 of this Federal Law come into force on the date of official publication of this Federal Law.

The president
Russian Federation
V.Putin

Moscow Kremlin

With respect and wishes for comfortable work, Ekaterina Zaitseva,

HR System expert