How to improve communication at home. We make a cellular communication amplifier with our own hands. Selecting an outdoor antenna

Selecting a signal amplifier cellular communications for the dacha

On weekends and holidays, city residents seek to spend time away from the bustle of the city in their dachas and country houses. Many people relax their souls, enjoying fresh air, nature and tranquility. Others are attracted to intricate summer cottages, growing plants, flowers, harvesting.

Despite the desire to relax, most city residents cannot do without cellular communications, and since the network sometimes does not reach outside the city, discomfort arises that can distract from relaxation. People are wondering - how to strengthen the cellular signal at the dacha with their own hands? Mobile phone Today it is not just a household item, it is a part of life, an opportunity to keep in touch with loved ones, control the progress of work, and remain accessible anywhere.

Mobile communications may not be available due to insufficient operator coverage. The quality of communication is also affected by the materials from which the country house is built.

To get out of this situation and stay connected, many give up the joy of a country holiday or prefer to purchase a plot of land with coverage. But there is another way out. You don’t have to give up your favorite remote area and spend a lot of time on it by installing specialized equipment that can strengthen the network signal - a cellular and Internet signal amplifier for the dacha. This amplifier mobile communications for a summer residence provides high-quality and continuous communication in any part of the house. There will be no need to search for the most suitable place to talk while trying to catch a signal.

General information

The problem of a poor-quality network will be solved by a device called a repeater. To forget about poor coverage forever, you need to install special equipment in your dacha. Its operation does not depend on a specific operator. Which services mobile company no matter if a person uses it, the signal will be improved. The quality of the signal amplified by the device is not affected by the frequency and standards used.

The operation of a cellular communication booster for a summer residence is based on a signal amplifier. An antenna receives the network signal and another antenna transmits. The device operates under the control of a controller and duplexer. They are frequency filters to improve communication quality. The design of the device allows you to amplify the cellular network signal in both directions. The radio channel amplifies the signal for all telephones within range.

The principle of operation of a cellular signal amplifier

The effectiveness of the device lies in the use of two antennas - external and internal. The external one is located outside the building. The wall of the house or the roof is most suitable for mounting. The antenna is installed in the direction of the closest mobile communication station. The antenna is connected to the main device via a cable. The external antenna operates by receiving the incoming signal and sending it to the internal repeater antenna.

Installation of the device must occur in a certain order. One of key points is the length of the cable. The shorter its length, the better quality received connection. The most practical place to mount the device is the façade of the building. The distance from the external to the internal antenna must be at least 20 meters.

Additionally, you need to install power dividers if the device is planned to be used over a large area. Using dividers you can connect to a repeater large quantity antennas To do this, select places indoors on the walls and ceilings. This allows you to get a uniform signal of good quality, regardless of obstacles in the form of walls and blocks.

Choosing a repeater - where to start

In search of an opportunity to strengthen the signal of mobile communications in the country or in the house, some craftsmen are trying to create a cellular amplifier with their own hands. But it is much safer to leave the solution to this issue in the hands of an experienced specialist than to make a homemade device or buy manufacturer’s equipment VEGATEL, which is considered one of the best on the domestic market.

But not everyone is deterred by the possibility of failure. Some craftsmen still take on the task of assembling the amplifier. The most primitive way is to connect a telephone set and an external antenna. This is the cheapest of the effective methods, but the most inconvenient, since the person talking on the phone will be tied to the place. Another disadvantage is that it increases the work for only one phone, so other family members will not be able to use high-quality telephone communication.

The most practical to use and high-quality is a professional factory-produced cellular communication amplifier for a summer residence. When purchasing an industrial device, you need to pay attention to such points as:

Average price;

Complete kit for installation and use;

Installation and application manual attachment;

Availability of service warranty repair from the manufacturer.

Compliance with these criteria ensures the fulfillment of the price = quality ratio and provides a guarantee of results. A model that meets these requirements will last long enough and effectively. A sufficient mobile signal will be provided to all users on the site using an industrial repeater.

Installing a single repeater to strengthen communications at the dacha is quite a budget option. By investing a slightly larger amount of money, you can install a mobile signal repeater. It is more powerful and enhances not just the mobile operator signal, but the Internet coverage. That is, in addition to communicating by phone, you can purchase the opportunity to use high-speed Internet.

Installation and configuration of a kit with a repeater

After successfully purchasing a complete repeater, the time comes to install the device and enjoy the benefits it creates.

Installation of a cellular signal amplifier for a summer residence occurs in several stages;

The first step is to measure the signal quality. This is done to correctly position the external antenna and check the power of the device itself. Measurements are made using a special professional program. The location with the best signal quality is determined and an external antenna is installed here.

Next is the direct process of assembling the signal amplifying equipment. At this stage, the help of a professional is also important. Installation involves working on the roof, using a hammer drill and other tools that not every owner has in stock. However, for a person who has the tools and skills to work with them, assembling a repeater will not be an impossible task.

The repeater must be installed near a power source to recharge the device. The repeater can be installed horizontally or vertically, this does not affect its operation in any way.

The final stage is the installation of the internal repeater antenna. You need to remember the required 20-meter distance between the external and internal antennas for successful operation of the repeater.

After installation, the operation of the signal amplifying device is adjusted. Setup is reduced to connecting cables to N-type connectors. After this, the amplifier is ready to perform its functions.

Setting up the device involves setting the gain factors for each channel.

Conclusion

This article is devoted to the principles of operation of a repeater for a dacha or country house. We hope that the information collected was useful in selecting, installing and configuring the device. This device is designed to provide users with high-quality cellular communications.

The price of a repeater depends on the country and manufacturer, as well as on the expected power. We recommend the manufacturer VEGATEL, whose products have an optimal price/quality ratio. Even the simplest repeater can significantly improve the quality of coverage at your dacha and provide uninterrupted mobile communication with the outside world.

A bad cellular signal is current problem not only in the outback, where the technical process has not yet reached. In large cities, the coverage of GSM operators is also weak. Take, for example, semi-basement premises: shops, offices, gyms and cafes - in these places there may be no connection at all. To ensure that people in such places are always connected, coverage can be artificially improved. Now we will tell you how this can be done at home.

How to strengthen a cellular signal - installing a GSM amplifier

This is enough effective method, which works by using an additional device as a repeater or repeater. The main advantage of the bottom method is the provision of decent, well-functioning coverage. You will not need to connect your phone to an analog antenna using a cable every time. This device allows you to boost 3G and 4G signals. Before purchasing equipment, it is a good idea to familiarize yourself with its specifications.

How to strengthen a cellular signal - installing an additional antenna

This method is lightweight and easy to install. The received signal will be of high quality wherever you are. The quality of communication will depend on the power of the GSM antenna. Now let's talk about the disadvantages. The antenna is connected to the phone through a special connector, which your model may not have. In addition, the antenna can cause inconvenience when using the phone. This method is often used by sailors, since there is no other way to solve the problem of lack of communication on the ship.

DIY cellular signal booster

Such a device will allow you to stay in touch in any corner of the Earth. Advantages of using this system:

• Reduced radiation levels.
• Removing interference.
• Increased battery life.
• Increased message clarity.
• Signal amplification.

But since this equipment is not cheap, we will tell you how to make it yourself.

What is needed for assembly

• Plastic.
• Polymer pipe (20 cm).
• Cable (10 m).
• Wire (30 cm).
• Fasteners
• Connection block.
• Electrical tape.

Assembly

The wire must be bent to form a rhombus. To do this, step back 9 cm in both directions. At the mark, bend the wire at an angle of 90 degrees. The operations performed will allow you to obtain a diamond. Bend the ends inward and attach a block to them. One side polymer pipe cut lengthwise and make a hole opposite.

Having assembled the antenna, we proceed to connecting the coaxial cable. Remove the outer insulation from one of its ends and connect to the junction block. What we got: the cable became a continuation of the antenna.

Now all that remains is to install the device on a pole or roof of the house. The last step is to attach the second end of the cable to the plastic plate.

Repeater installation

Assembling a cellular communication amplifier is only half the battle; you still need to install it correctly. The efficiency of equipment operation is influenced by 2 factors:

• Location.
• Antennas included in the system.

Before installation, it would be a good idea to make sure there is a signal. To do this, make a call from your phone or look at the signal strength indicator.

Having planned the location of the components, you can begin laying the coaxial cable. First of all, make sure that all connectors are clean and intact. There are also restrictions in temperature conditions. External antenna can be operated at temperatures from -40 to +50, but the repeater should always be located in a heated room with a positive temperature.

Amplifier settings

Connect the antennas and power adapter to the high-frequency connectors. To protect against power surges, use a surge protector.

The next step is to adjust the gain. There is one requirement for it - it must be at least 15 dB. The repeater can be configured either manually or automatically. In the first case, the potentiometer knob is used, and the position of the internal and external antennas is changed.

Under automatic tuning This means setting the gain level so that the output gets maximum power. In this case, the device will independently adapt to the traffic of the operator’s station.

Nowadays, many people work directly on the Internet; they do not necessarily have to sit in an office to conduct their business. Many problems are solved through the network, so it is extremely important that a high-quality Internet signal is available absolutely everywhere. If the dacha is located far enough from the city, plus the tower is not located nearby, then you can’t hope for high-quality Internet. But what to do in this case, not go to the country? Build a tower near you? Everything is much simpler: you just need to make an Internet signal amplifier for your dacha yourself.

A little theory

Before you find out how to make the best Internet signal booster for your dacha, you need to understand a little what 3G and 4G are, and also what can cause a bad signal.

Not so long ago, many summer residents used satellite internet, but this technology has almost completely outlived its usefulness, now the vast majority of people use it, which gives a very good speed for comfortable work online. Today in Russia there are three communication formats - 2G, 3G and 4G. As reported a little earlier, in 2 years, in 2020, the most modern format- 5G.

To understand how the classification of communication formats differs, you need to know the following:

• 2G, also known as EDGE, is the slowest mobile Internet, its speed does not exceed 40 Kb/s, and today it is practically not used anywhere.
• 3G is the first high speed internet, thanks to which you can surf pages very comfortably. The speed of this communication format does not exceed 800 Kb/s.
• 4G is the fastest mobile Internet in Russia today, its speed is 2-5 Mb/s.
• 5G - since the implementation of this format has not yet occurred, it is quite difficult to say exact numbers, but the approximate speed should be about 1 Gb/s.

These statistics are approximate, because theoretically the speed can increase at each point, it all depends on bandwidth operator.

Mobile Internet signal amplifier for a summer residence

Each person can personally enhance the signal quality of a 4G modem, which can be purchased at any mobile phone store of the selected operator. To use the Internet through such a modem, you need a computer or laptop. But you should also take into account the factor of connection stability; if the operator is not able to maintain an uninterrupted signal (even at low speed), then it is rational to simply change it. Otherwise, the user will still receive a poor-quality Internet connection.

There are several possible options how to strengthen the signal. The most popular are:

1. Extend the USB cable through which the modem is connected to the computer or laptop. Thanks to this, the modem can be placed somewhere higher or even taken outside, and the quality of communication will significantly improve.
2. UTP extender for 3 or 4G modem. A regular USB extension cable is unable to work properly if the cord length exceeds 4 meters. In this case, the extension cord can have a high-quality connection to the computer at a distance of up to 20 meters. Therefore, the modem can even be taken to the roof of the house.
3. Purchase a special Internet signal amplifier. Not the cheapest way, because the cost of a complete set will cost about 2800 rubles. ($50), however, the end result is really worth the money.
4. Make a special antenna with your own hands that will improve the quality of communication.
5. Change operator. At first glance, such a banal procedure may turn out to be the most effective.
6. Select the “3G Only” or “4G Only” mode.

We’ve sorted out the main methods for improving Internet connection, now we’ll talk about each of them in more detail.

Extend the modem via USB cable

To improve the quality of the signal, you should understand that this is a wave that spreads unevenly in different parts of the house. This means that you first need to determine where the signal is strongest and most stable. This will require a little time and patience, when this place is determined, you should proceed to the next step.

Almost all modems display the dBm value, which is what you should pay attention to. If this value is less than 70, the signal is simply excellent and this is where it is best to place an Internet access point. When the signal level is within 70-80 dBm - an average indicator, if there is no better indicator in the house, then you will not notice any strong discomfort when surfing pages. But when the dBm value is more than 100, the signal is very weak.

In practice, it is known that the strongest signal exists near windows and closer to the ceiling. It is best to place the modem somewhere near the roof. At the same time, you don’t have to worry about the device. All modems are not afraid of wind, rain and frost, but it is not advisable to expose the device where there is a lot of sunlight.

So, if the location has been determined, now you need to go to the store and simply purchase a USB extension cable of the required length. It is important to remember that if it is more than 4 meters long, then this procedure loses all meaning, the signal quality will again be poor.

UTP extender

If four meters of an extension cable is not enough to seriously improve the signal quality, then you should purchase a special UTP extension cable. Such a device can qualitatively extend the modem up to 20 meters. Therefore, if the access point needs to be placed on the roof, this is exactly what you need.

The extension cord consists of three parts:

1. A USB port that plugs into a laptop or computer.
2. The port where the modem is connected.
3. UTP cable that connects two ports. You can use a classic UTP-5E cable.

But if 20 meters of cable is not enough for you, then in this case you should purchase a more expensive one. High-quality information transmission will be stable at a distance of up to 50 meters.

for the dacha

Often in stores you can see special antennas that are designed to amplify the signal. They are purchased with required quantity cable, the antenna should be installed on the roof of the house.

The difficulty of installation is that one person cannot do it. Before installing the antenna, you should choose its exact direction, in which direction there will be the highest quality signal. The process goes something like this: one person slowly turns the Internet signal amplifier for the dacha, and the second on the computer looks at the dBm frequency and where the value will be the lowest, in this direction the device should be mounted.

The antenna itself is connected to the modem, and the modem, via a cable, is connected to the computer. It is also worth noting that the modem must be no further than two meters from the signal amplifier, otherwise there will be no result. There are also some other connection difficulties. Not all modems have antenna outputs, and those that do are of insufficient quality, so it is likely that you will have to resolder the input yourself. If you don’t know how to do this, then it’s better to take the modem to craftsmen who have soldered dozens of such devices.

This method is very complex and expensive; moreover, the antenna must be grounded. However, in some cases it is the antenna that becomes the savior. If the tower is located far enough (more than 10 km), then this is the only correct solution.

DIY signal booster antenna

You can use a homemade antenna not only at the dacha, but also on a hike; it’s quite simple to make. You need to wind copper wire onto the USB modem; it’s quite difficult to say how many turns you need, but there should be quite a few of them. The most wire should be wound where the SIM card is located. At the end of the wire you need to make a small screen from an ordinary tin can, and if you have an unnecessary CD, then it is generally ideal for a homemade antenna. Such a simple Internet signal amplifier for a summer residence can improve the quality of communication by up to 20%, which is a very good indicator.

Second version of a homemade antenna

There is also a stationary version of the antenna. Two diamond shapes should be made from fairly thick copper wire. In appearance, the antenna should resemble an unrounded figure eight. A regular antenna cable should be soldered to the joints of the diamonds, and the other end of the cable should be wrapped around the modem, as indicated in the previous example. Mount the antenna with the modem on the roof of the house or place it out the window, and connect the modem to the computer using a USB or UTP extension cable.

Changing operator

The quality of the Internet signal directly depends on the proximity of the towers located and the quality of the equipment. Therefore, before tinkering with anything, you should try to simply change the operator, sometimes this is the simplest and most effective method of strengthening the signal.

Users' opinions

But what do they say about what it really is - the best Internet signal amplifier for a summer residence, user reviews? Of all the methods described above, people most often prefer conventional extension cords. In most cases, they are the ones who help solve the problem. Also, many people respond well to the antennas they purchased. As for homemade devices, opinions are divided here. DIY antennas have helped some, while others complain that there was no signal improvement at all. However, we should not forget that people could simply not follow the instructions or simply do something incorrectly.

Despite the widespread use of mobile communications, the question of how to strengthen the signal of the phone, or rather the cellular network to which it is connected, is still relevant. It doesn’t matter whether you live in a small village or in a metropolis, the likelihood that your device will stop receiving a signal is everywhere.

This problem is gradually being solved by operators, new base stations are appearing, and communications are improving. What if the problem lies with your phone and not the network? Today we decided to figure out what is causing the poor signal level and whether it can be fixed with our own hands.

What is a cellular signal?

The principle of operation of cellular communications is quite simple: there is an operator’s base station and your phone, a radio frequency channel is organized between them, through which SMS messages are transmitted, calls are made, and Internet data is exchanged.

There are several cellular communication standards, differing in the method of signal transmission and frequency. As a rule, base stations are built at higher elevations in order to provide maximum coverage area. However, there is no escape from the obstacles that prevent the signal from passing through. These can be walls, trees, and other obstacles, upon contact with which the signal weakens.

It is clear that in open areas where high-rise buildings do not abound, the coverage area will be higher. For example, for stations operating according to the GSM-900 standard, in this case the zone is no more than 30,000 kilometers. In urban areas, the figure decreases to 7 kilometers. Stations with more advanced communication standards such as 3G and LTE cover an area half the diameter.

Why do we have a weak phone signal?

Due to the above-mentioned obstacles, so-called dead zones or holes in the coating may form. That is, places where the signal is weak, unstable or completely absent. Where you most often encounter poor signal levels on your phone:

• places located at a significant distance from the nearest station (there is simply no coverage);
• basements, underground parking lots, lowlands (the signal simply cannot penetrate here);
• hills, skyscrapers (often “going higher” does not necessarily mean the presence of a signal - above the 12-14th floor there is often no signal at all);
• buildings made of metal structures that do not transmit signals.

However, obstacles and distance from the station are not always the reason for the lack of signal. Often the cause is the user's phone. You've probably been in situations where a friend has a cellular signal, but you don't.

And this is despite the fact that you are using the services of one operator. There are common cases when two identical phones have different signal levels. There can be many reasons:

• a phone in a metal case or in a metal case can catch the network much worse than a plastic device;
• quite often, no matter how surprising it may sound to you, the cause is the “clumsy” phone firmware;
• damage to any components as a result of falls, immersion in water, etc.;
• The phone may have a defective antenna from the factory, which is especially common among Chinese manufacturers of inexpensive models.

How to boost your phone signal with your own hands?

Well, we've covered the theory, let's move on to practice. We will look at several ways to boost a cellular signal, from the simplest to the rather complex and expensive.

The reason is in the firmware

It's worth starting by checking that the software is working correctly before trying to get to the inside of the phone. Hundreds of users are experiencing deterioration in the communication signal that appears after flashing, so it’s worth paying attention.

We have already written, so we will not repeat ourselves. Firmware is a fairly simple process, but with its own nuances. The main thing is to remember to make backup copies of important files.

If the flashing helped, then we congratulate you, but if the phone still has poor network reception, then move on to the next point.

The signal is poorly received due to damage to the phone

As already noted, often the phone does not receive a signal well after it accidentally fell on a tile or plunged into the sea. In this case, the average user has no choice but to go to service center.

Modern phones are quite complex devices, so for most people it is not possible to identify the source of the problem on their own. It is likely that specialists will detect damage and carry out necessary work so that your phone can once again cope with searching for a network without any problems.

How to boost your phone signal with your own hands

In most cases the reason weak signal cellular communication lies in a defect in the antenna, which, in fact, is responsible for this function. Often, owners of inexpensive smartphones from the Middle Kingdom are faced with the fact that the manufacturer has cheated a little by not tightly connecting the antenna to the device’s motherboard. You can correct the mistake yourself, but you need to at least understand a little about how the phone works. Otherwise, contact the service center with a description of the problem.

1. Nowadays smartphones are represented by the most different designs, therefore they are understood differently; It’s easiest to get to the insides of a phone with a removable cover and battery, but it’s more difficult when the smartphone is non-separable;

Take your time. Before you start disassembling, find a video or text material on the Internet that will show and tell you how to disassemble your specific device and what you should pay attention to.

Please also note: After disassembling the smartphone you lose the warranty.

1. as a rule, the antenna is hidden in the lower or upper part of the case, represented by small copper strips (again, for the location of the antenna specifically in your model, see the relevant materials);
2. after you get to the board, you will find several spring contacts that should fit tightly to the cable located on the back of the structure;
3. if the spring contacts of the motherboard do not fit well to the cable, carefully straighten them using, for example, tweezers;
4. We collect the phone and enjoy a good network signal.

We connect a homemade antenna to the phone to strengthen the signal

The methods discussed above only work if the problem lies with your phone. But, as we noted at the beginning of the material, the cause of a bad signal can be various kinds of obstacles or a significant distance from the station. In this case, you can try to strengthen the antenna of our device with just a piece of wire.

Let us immediately note that this method is not suitable for all phones. The fact is that to implement it you will need a special diagnostic port, which is difficult to get to in a modern non-separable smartphone (in a number of models it cannot be found at all). It looks like a small round connector of golden color.

take a small piece of thin insulated wire;

insert into the connector;

Place it in such a way that it does not interfere with other components or the closing of the lid.

Everything, as practice shows, the phone network signal is greatly enhanced. Isn't it surprising?!

Some users inserted a piece of wire into the 3.5 mm port (under headphones). Sometimes this works too.

Sticker sticker or foil to boost phone signal

In the vastness of foreign online stores, it will not be difficult to find a bunch of different devices for amplifying the signal. Among them, a small sticker sticker is popular, consisting of several metal tracks, which, according to the manufacturer, allow you to get rid of interference.

Similar stripes can be seen in some smartphones by default, so the “magical” properties of the sticker have a right to life.

However, according to a considerable number of users, a piece of ordinary foil will help to achieve a slight improvement in the signal. It is located under the phone cover, closer to the antenna. The method is not complicated, so you can try it.

Strengthening communications using a repeater

In some cases, when the signal cannot be amplified by any of the methods (the walls of the room are too thick, the distance from the base station), they resort to the use of special antennas or repeaters. Such devices are capable of significantly amplifying the signal, but their cost often deters potential buyers.

Where to buy cheap?

You can build something similar with your own hands, but often it does not enhance the signal at all or does it very, very poorly.

For example, some people use the following method:

1. take a metal rod (50 cm is enough), a coaxial cable, a piece of foil (about 10x4 cm) and plywood or plastic;
2. we bend the metal rod so that we get a diamond-shaped structure;
3. glue the foil to the plywood;
4. We connect the metal rhombus and the foil using a coaxial cable (solder);
5. We lift the end on which the diamond is located higher, the other, with foil, is left below;
6. We bring the phone to the foil to check the signal quality.

You will probably need to find the most suitable location for the resulting structure to pick up the signal.

It is clear that such an amplifier is unlikely to provide communications to a large company that is not lucky enough to have an office in an area without network coverage. Here you will have to turn to specialists for help. Today, many companies provide similar services, and will not only offer modern equipment, but will also handle installation.

By the way, you shouldn’t skimp on specialists - for installation, workers use special devices that help determine the most suitable location, select frequencies, etc. An ordinary user, of course, will find it difficult to cope with such a task.

It is not always possible to use wired Internet, for example, at the dacha, in country house, in a new office, and the mobile Internet works poorly or disappears altogether. In order not to burn out your nerve cells by spending 10 minutes trying to load a video or a heavy page, you can buy an antenna amplifier. This article is dedicated to one of the modern models - HiTE HYBRID, which helps increase the speed of both 3G and 4G (LTE) Internet, does not require long settings (it took me no more than five minutes to connect) and is connected using a single cable, through which Both power supply and data transfer occur.

The HiTE HYBRID antenna amplifies the signal using MIMO technology, which significantly increases the quality and stability of the Internet connection. The declared antenna gain for 4G is 2 × 16 dBi, for 3G - 2 × 13 dBi.

In addition, the Internet can be distributed through a router: HiTE HYBRID is compatible with all routers, and you can connect it to both a PC and a router.

We tested the HiTE HYBRID antenna for 4G signal amplification and received good results not only in Internet speed, but also in the ease of installing and configuring the antenna.

By the way, since 4G Internet is still far from universal, in case of its absence, the antenna amplifies the 3G signal, and this deserves special mention.

Now and with a view to the future

That's it now mobile operators are switching from 3G to the fourth generation Internet, but still the 4G coverage area is not available everywhere.

It turns out that if you decide to strengthen the 3G signal, you need to buy an antenna specifically for this reception frequency, and in a year or two, when the 4G coverage area reaches your area, you will have to buy a new one.

With HiTE HYBRID such troubles are eliminated. It amplifies 3G and 4G signals and selects the best, so you don't have to worry about frequencies or buying new equipment.

Equipment and configuration

In the box you will find the antenna itself and a neatly folded PoE adapter, an Ethernet cable for connection, a power adapter and a mount.

Antenna and accessories in the box

The HiTE HYBRID antenna has a durable and completely sealed housing made of metal and plastic with dimensions of 250 × 250 × 75 mm and a weight of 2 kg.

Of course, it is best if the antenna is installed outside, on the roof of a building or on a bracket outside a window. In this case, maximum gain can be achieved.

Operating temperature range from -30 to + 50 °C. The manufacturer promises that operation is possible at lower temperatures if the power is not turned off in winter. The kit includes a pole mount (or bracket).

A cable 30 m long is suitable for the antenna. This is quite enough to stretch it from the house to the roof, but if you need more, you can extend it to 100 m.

As we wrote above, this cable serves both for power and data transmission, which simplifies installation even more - you don’t have to buy any adapters or extension cords. The kit already contains everything you need to operate the antenna.

Select SIM

You will need a SIM card for the antenna. If your SIM card does not support a 4G network at a frequency of 2,500–2,700, the antenna will work with a 3G network at a frequency of 1,900–2,200.

In general, the antenna will work with any Russian operator that provides mobile Internet using 3G or 4G technology. I tested the antenna with a Megafon SIM card with 4G Internet.

We insert the SIM card into the special slot and screw on the waterproof cover. It's sealed, so you don't have to worry about the safety of your SIM card.

We open the address specified in the instructions on the PC and see the connection management interface.

You can see the connection status and statistics.

Testing the antenna in the field

To test the speed of the antenna, I used the Speedtest.net service. To compare the speed, I took a modem from Megafon with me and tested it with the same 4G SIM card.

We decided to test the antenna in the field conditions for which it was, in fact, intended. Since I have neither a dacha nor a country house, we simply went out into nature - into the forest not far from the city (about 12 km).

Location 1. Clearing in the forest, 12 km from the city

6.21 Mbit/s - incoming speed, 1.21 Mbit/s - outgoing speed.

Modem: does not connect.

We assembled it according to the instructions included in the kit: we connected the antenna to the POE adapter, the adapter to the laptop and connected it to the car’s network via a converter.

I must say right away that we tested more than one place - somewhere the antenna worked better, somewhere worse. In the original location, where the modem completely refused to pick up a 4G signal, the antenna gave an incoming speed of 6.21 Mbit/s.

Location 2. On a hill, 12 km from the city

8.62 Mbit/s - incoming speed, 1.05 Mbit/s - outgoing speed.

Modem: does not connect.

The fishing was best near the car, although due to the long cable we moved around the entire clearing, trying to catch the best signal. The most successful indicator in this area is 8.62 Mbit/s (stopped on a hill).

The next place was closer to the city, about 5 km, in a field.

Location 3. Field, 5 km from the city

11.95 Mbit/s - incoming speed, 0.44 Mbit/s - outgoing speed.

Modem: 0.05 Mbit/s - incoming speed, 0.05 Mbit/s - outgoing speed.

Here the modem from Megafon started working. It returned 0.05 Mbps (not to mention that we could barely wait for it to open the speed test at all).

With the antenna, mobile Internet from Megafon soared to 11.95 Mbit/s. In principle, these were the best results that were achieved.

General impression

If you use a 3G/4G antenna outside the city, where the Internet often disappears altogether, the performance is very different from the same modem (as can be seen in the screenshots above).

In a forest clearing 12 km from the city, we got the speed with which we can use the Internet without the risk of breaking the computer from rage.

In principle, if instead of a person who wanders through the field and forest clearings, raising the antenna above his head, there was a master who will install the antenna on the roof of the dacha, the speed would be even faster.

But, as I said above, to connect an antenna and get your legitimate 5-10 Mbit/s even on 3G, you don’t need any knowledge or skills.

So if you have been suffering from slow motion for a long time mobile Internet(or lack thereof), you can read detailed specifications and order the antenna here↓

Hite Hybrid 3G/4G antenna

P.S. HiTE also produces more powerful 4G LTE antennas, but we chose the HYBRID model for testing for its versatility and ease of setup.

home » Loans » How to improve communication at home. We make a cellular communication amplifier with our own hands. Selecting an outdoor antenna