Repair, design, furniture, construction, instructions. Sample job description of a service engineer for the repair of special equipment Job description of an engineer for planning repairs

Added to the site:

Job description repair engineer [ name of company, enterprises, etc.]

This job description has been developed and approved in accordance with the provisions of other regulations governing labor relations in Russian Federation.

I. General provisions

1.1. A repair engineer belongs to the category of specialists; he is hired and dismissed by order of the director of the enterprise upon the recommendation of [fill in what is required].

1.2. The repair engineer reports directly to [the head of the relevant structural unit, other official].

1.3. During the absence of a repair engineer (business trip, vacation, illness, etc.), his duties are performed by a deputy appointed in the prescribed manner, who bears full responsibility for their high-quality and timely implementation.

1.4. A person with a higher professional (technical) education and work experience as a repair engineer of category II for at least [value] years is appointed to the position of repair engineer of category I; for the position of repair engineer of category II - a person who has a higher professional (technical) education and work experience as a repair engineer or other engineering positions filled by specialists with a higher vocational education, not less than [value] years; for the position of repair engineer - a person who has a higher professional (technical) education, without presenting requirements for work experience, or secondary vocational (technical) education and work experience as a category I technician for at least [value] years or other positions filled by specialists with secondary vocational education, at least [value] years.

1.5. In his activities, the repair engineer is guided by:

Legislative and regulations regarding the work being performed;

Methodological materials relating to relevant issues;

Charter of the enterprise;

Rules labor regulations;

Orders and instructions of the director of the enterprise (direct manager);

This job description.

1.6. The repair engineer must know:

Resolutions, instructions, orders, methodological and regulatory materials on the maintenance and repair of equipment, technical prospects enterprise development;

Organization of repair work and Maintenance equipment;

A unified system of scheduled preventive maintenance and rational operation of process equipment;

Technical characteristics, design features, purpose and operating modes of enterprise equipment, its rules technical operation;

Methods for planning repair work;

Basic technological processes production of enterprise products;

Advanced repair systems and repair technology;

The procedure for drawing up estimates for repairs, requests for equipment, materials, spare parts, tools, etc.;

Fundamentals of economics, organization of production, labor and management;

Fundamentals of labor legislation, rules and regulations of labor protection.

II. Functions

The repair engineer is responsible for the following functions:

2.1. Organization of repair of equipment and other fixed assets of the enterprise.

2.2. Interaction with representatives third party organizations on related issues.

2.3. Generalization and dissemination of best practices in organizing the repair and operation of equipment, providing practical assistance to innovators and inventors.

2.4. Development of regulatory materials, preparation of technical documentation.

2.5. Ensuring compliance with the rules of operation, maintenance and supervision of equipment.

2.6. Submission of established reports.

2.7. [Enter as appropriate].

III. Job responsibilities

To perform the functions assigned to him, the repair engineer is obliged to:

3.1. Develop long-term and current plans (schedules) various types repair of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage systems, air ducts, etc.), as well as measures to improve their operation and maintenance, monitor the implementation of approved plans (schedules).

3.2. Promote systems implementation comprehensive service, ensuring timely adjustment and repair of equipment, efficient operation of the enterprise, progressive repair technologies, highly efficient repair devices, mechanization of labor-intensive processes.

3.3. Take part in checking the technical condition of equipment, the quality of repair work, as well as in the acceptance of equipment newly arriving at the enterprise, and, if necessary, draw up documentation for the decommissioning of equipment that has become unusable or its transfer to other enterprises.

3.4. Organize the preparation of repair work, determine the need for spare parts for equipment repair.

3.5. Monitor the activities of the enterprise departments involved in repair work and testing of equipment, compliance with the rules of operation, maintenance and supervision of it.

3.6. Develop measures to improve the organization of maintenance and repair of equipment, to reduce the labor intensity and cost of repair work, improve their quality, increase the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).

3.7. Participate in planning the technical development of production, major repairs and modernization of fixed assets, drawing up a balance sheet production capacity and their use.

3.8. Develop regulatory materials for preventive maintenance and repair of equipment (standards for repair and operating costs, service life of spare parts, range of replaceable and wearing parts, norms and limits for lubricant consumption).

3.9. Analyze the causes of increased wear, accidents and equipment downtime and participate in the investigation of their causes, as well as the causes industrial injuries, take measures to prevent it.

3.10. Monitor compliance with established deadlines for drawing up lists of defects and requests for repairs.

3.11. Draw up requests and specifications for spare parts, materials, tools, monitor the correct use of them.

3.12. Prepare materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed assets (industrial-production and non-industrial) assets, and monitor the expenditure of funds for these purposes.

3.13. Take part in work related to the development and implementation of standards and technical specifications for operation, maintenance and repair of equipment.

3.14. Give conclusions on rationalization proposals and inventions, on issues of improving the design of equipment, organizing repair work and maintenance of equipment, provide practical assistance to innovators and inventors and organize the implementation of accepted proposals.

3.15. Summarize and disseminate best practices in organizing the repair and operation of equipment.

3.16. Keep records and certification of equipment, buildings, structures and other fixed assets of the enterprise, make changes to the passports after their repair, modernization and reconstruction, draw up the necessary technical documentation and maintain established reporting.

3.17. [Enter as appropriate].

IV. Rights

The repair engineer has the right:

4.1. Get acquainted with the draft decisions of the enterprise management concerning its activities.

4.2. Submit proposals for improvement of work related to the responsibilities provided for in these instructions for consideration by management.

4.3. Receive information and documents from heads of structural divisions, specialists on issues within his competence.

4.4. Involve specialists from all structural divisions of the enterprise to resolve the responsibilities assigned to it (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the enterprise).

4.5. Require the management of the enterprise to provide assistance in the performance of their official duties and rights.

V. Responsibility

The repair engineer is responsible for:

5.1. For failure to perform (improper performance) of one’s official duties as provided for in this job description, within the limits specified labor legislation Russian Federation.

5.2. For offenses committed in the course of carrying out their activities - within the limits determined by the administrative, criminal and civil legislation of the Russian Federation.

5.3. For causing material damage- within the limits determined by the labor, criminal and civil legislation of the Russian Federation.

The job description has been developed in accordance with [name, number and date of document].

Head of structural unit

[initials, surname]

[signature]

[day month Year]

Agreed:

Boss legal department

[initials, surname]

[signature]

[day month Year]

I have read the instructions:

[initials, surname]

[signature]

[day month Year]

______________________________________________

(name of organization, enterprise, etc.)

" " ______________ 20__ N_________

This job description was developed and approved by

basis employment contract With __________________________________________

(name of the position of the person for whom

And in accordance with

this job description has been compiled)

provisions of the Labor Code of the Russian Federation and other regulatory

acts regulating labor relations in the Russian Federation.

I. General provisions

1.1. A repair engineer is classified as a specialist and

reports directly to _____________________________________________________.

1.2. For the position:

A person with a higher education degree is appointed as a repair engineer

vocational (technical) education, without requirements for

work experience, or secondary vocational (technical) education and

work experience as a category I technician for at least _______ years or

other positions filled by specialists with secondary professional

education, at least _______ years;

Repair engineer category II - a person with a higher

repair engineer or other engineering positions,

replaced by specialists with higher professional education, no less

Years;

Repair engineer category I - a person with a higher

professional (technical) education and work experience in the position

repair engineer category II for at least _______ years;

1.3. Appointment to the position of repair engineer and release from

it is carried out by order of the head of the enterprise upon presentation

1.4. An automation engineer must know:

Resolutions, orders, orders, other regulatory and

methodological materials for maintenance and repair

equipment;

Prospects for the technical development of the enterprise;

Organization of repair work and technical

equipment maintenance;

A unified system of scheduled repairs and rational

operation of technological equipment;

Technical characteristics, design features, purpose

and operating modes of the enterprise equipment, the rules of its technical

operation;

Methods for planning repair work;

The main processes of production of the enterprise's products;

Advanced repair systems and repair technology;

The procedure for drawing up estimates for repairs, applications for

equipment, materials, spare parts, tools, etc.;

Fundamentals of economics, organization of production, labor and management;

Fundamentals of labor legislation of the Russian Federation;

Labor safety rules and regulations;

- _________________________________________________________________.

1.5. The repair engineer reports directly to ________________

________________________________________________________________________.

1.6. During the absence of a repair engineer (vacation, illness, etc.)

his duties are performed by a person appointed in accordance with the established procedure.

This person acquires the corresponding rights and is responsible for

proper performance of the duties assigned to him.

1.7. ______________________________________________________________.

II. Job responsibilities

Repair engineer:

2.1. Develops long-term and current plans

(schedules) of various types of repairs of equipment and other fixed assets

enterprises (buildings, water supply systems, sewerage systems, air ducts and

etc.), as well as measures to improve their operation and maintenance,

controls the implementation of approved plans (schedules).

2.2. Promotes the implementation of integrated regulated systems

maintenance, ensuring timely adjustment and repair of equipment,

efficient operation of the enterprise, progressive repair technology,

highly efficient repair devices, mechanization of labor-intensive

processes.

2.3. Takes part in checking the technical condition

equipment, quality of repair work, as well as in acceptance again

equipment arriving at the enterprise, if necessary, draws up

documentation for its write-off or transfer to other enterprises.

2.4. Organizes the preparation of repair work, determines the need for

spare parts for equipment repair, to provide the enterprise with them

on terms of cooperation.

2.5. Monitors the activities of departments

enterprises involved in repair work and testing

equipment, compliance with operating rules, technical

maintenance and supervision.

2.6. Develops activities aimed at improving

organizing maintenance and repair of equipment to reduce labor intensity

and the cost of repair work, improving their quality, increasing

efficient use of fixed assets (increased wear resistance

and reducing equipment downtime).

2.7. Participates in technical development planning work

production, overhaul and modernization of fixed assets,

drawing up a balance of production capacities and their use.

2.8. Develops regulatory materials on preventive

maintenance and repair of equipment (standards for repair and maintenance

costs, service life of spare parts, range of replacement and

wear parts, norms and limits of lubricant consumption

materials).

2.9. Analyzes the causes of increased wear, accidents and downtime

equipment and participates in the investigation of their causes, as well as the causes

occupational injuries, takes measures to prevent them.

2.10. Monitors compliance with established deadlines

compiling lists of defects and requests for repairs.

2.11. Prepares requests and specifications for spare parts, materials,

tool, controls the correct use of them.

2.12. Prepares materials for concluding contracts with

manufacturing enterprises for the supply of spare parts and equipment,

as well as with specialized contractors for capital

repair of basic (industrial-production and non-production)

funds, exercises control over the expenditure of funds for these purposes.

2.13. Takes part in work related to the development and

implementation of standards and technical specifications for operation, maintenance and

equipment repair.

2.14. Gives conclusions on rationalization proposals and

inventions, on improving the design of equipment,

organizing repair work and equipment maintenance,

provides practical assistance to innovators and inventors and

organizes the implementation of accepted proposals.

2.15. Summarizes and disseminates best practices in organizing repairs and

equipment operation.

2.16. Maintains records and certification of equipment, buildings, structures and

other fixed assets of the enterprise, makes changes to the passports after they are

repair, modernization and reconstruction, constitutes the necessary technical

documentation and maintains established reports.

2.17. Performs individual official assignments of his

immediate supervisor.

2.18. _____________________________________________________________.

The repair engineer has the right:

3.1. Get acquainted with the draft decisions of the enterprise management,

relating to his activities.

3.2. Submit proposals for management's consideration

improvement of work related to the responsibilities provided for

this instruction.

3.3. Notify your immediate supervisor of any identified

in the performance of their official duties, shortcomings in

production activities enterprise (its structural

departments) and make proposals to eliminate them.

manager from heads of departments of the enterprise and specialists

information and documents necessary to perform their duties

responsibilities.

3.5. Involve specialists from all (separate) structural

divisions of the enterprise to solve the tasks assigned to it (if this

provided for by the provisions on structural divisions, if not - with

permission from the head of the enterprise).

3.6. Require the management of the enterprise to provide assistance in

performance of their official duties and rights.

3.7. ______________________________________________________________.

IV. Responsibility

The repair engineer is responsible for:

4.1. For improper performance or failure to fulfill their duties

duties provided for in this job description, in

within the limits determined by the labor legislation of the Russian Federation.

4.2. For offenses committed in the course of exercising their

activities - within the limits determined by administrative, criminal and

civil legislation of the Russian Federation.

4.3. For causing material damage - within the limits specified

labor and civil legislation of the Russian Federation.

The job description was developed in accordance with ________________

(Name,

_____________________________.

document number and date)

Head of structural unit (initials, surname)

_________________________

(signature)

" " _____________ 20__

Agreed:

Head of the legal department

(initials, surname)

_____________________________

(signature)

" " ________________ 20__

I have read the instructions: (initials, surname)

_________________________

(signature)

" " _____________ 20__

Approximate form

I approve

___________________________________ (initials, surname)

(name of company, ________________________

enterprises, etc., him (director or other

organizational- legal form) executive,

authorized

approve official

instructions)

I CONFIRM:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"_____" _______________ 20___

JOB DESCRIPTION

Repair engineer

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job responsibilities, rights and responsibilities of the repair engineer [Name of the organization in genitive case] (hereinafter referred to as the Company).

1.2. A repair engineer is appointed to a position and dismissed from a position in accordance with the procedure established by current labor legislation by order of the head of the Company.

1.3. A repair engineer belongs to the category of specialists and is subordinate to [names of subordinate positions in the dative case].

1.4. The repair engineer reports directly to [name of the immediate supervisor's position in the dative case] of the Company.

1.5. A person with the appropriate qualifications is appointed to the position of repair engineer:

Repair engineer category I: higher professional (technical) education and work experience as a repair engineer of category II for at least 3 years.

Repair engineer II category: higher professional (technical) education and work experience as a repair engineer or other engineering positions filled by specialists with higher professional education for at least 3 years.

Repair engineer: higher vocational (technical) education without requirements for work experience or secondary vocational (technical) education and work experience as a category I technician for at least 3 years or in other positions filled by specialists with secondary vocational education for at least 5 years.

1.6. The maintenance engineer is responsible for:

• effective performance of the work assigned to him;
• compliance with the requirements of performance, labor and technological discipline;
• the safety of documents (information) in his custody (that have become known to him) containing (constituting) the Company’s trade secret.

1.7. The repair engineer must know:

• decrees, orders, orders, methodological and regulatory materials on the maintenance and repair of equipment, prospects for the technical development of the enterprise;
• organization of repair work and equipment maintenance;
• A unified system of scheduled preventive maintenance and rational operation of process equipment;
• specifications, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation;
• methods for planning repair work;
• the main technological processes of production of the enterprise's products;
• advanced repair systems and repair technology;
• the procedure for drawing up estimates for repairs, requests for equipment, materials, spare parts, tools, etc.;
• fundamentals of economics, organization of production, labor and management;
• basics of labor legislation;
• rules and regulations of labor protection.

1.8. The repair engineer is guided in his activities by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions from the immediate supervisor;
• this job description.

1.9. During the period of temporary absence of the repair engineer, his duties are assigned to [name of the deputy position].

2. Job responsibilities

The repair engineer is required to perform the following labor functions:

2.1. Carries out the development of long-term and current plans (schedules) for various types of repairs of equipment and other fixed assets of the enterprise (buildings, water supply systems, sewerage systems, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules) ).

2.2. Promotes the implementation of comprehensive regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, progressive repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.

2.3. Takes part in checking the technical condition of equipment, the quality of repair work, as well as in the acceptance of equipment newly arriving at the enterprise, and, if necessary, draws up documentation for its decommissioning or transfer to other enterprises.

2.4. Organizes the preparation of repair work, determines the need for spare parts for equipment repair, and provides them to the enterprise on the terms of cooperation.

2.5. Monitors the activities of the enterprise departments involved in repair work and testing of equipment, compliance with the rules of operation, maintenance and supervision of it.

2.6. Develops measures aimed at improving the organization of maintenance and repair of equipment, reducing the labor intensity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).

2.7. Participates in planning the technical development of production, major repairs and modernization of fixed assets, drawing up a balance of production capacities and their use.

2.8. Develops regulatory materials for preventive maintenance and repair of equipment (standards for repair and operating costs, service life of spare parts, range of replaceable and wearing parts, norms and limits for lubricant consumption).

2.9. Analyzes the causes of increased wear, accidents and equipment downtime and participates in the investigation of their causes, as well as the causes of industrial injuries, and takes measures to prevent them.

2.10. Monitors compliance with established deadlines for drawing up lists of defects and requests for repairs.

2.11. Draws up requests and specifications for spare parts, materials, tools, monitors the correct use of them.

2.12. Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed assets (industrial-production and non-industrial) assets, and monitors the expenditure of funds for these purposes.

2.13. Takes part in work related to the development and implementation of standards and technical specifications for the operation, maintenance and repair of equipment.

2.14. Gives opinions on rationalization proposals and inventions, on improving the design of equipment, organizing repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of accepted proposals.

2.15. Summarizes and disseminates best practices in organizing the repair and operation of equipment.

2.16. Keeps records and certification of equipment, buildings, structures and other fixed assets of the enterprise, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains established reporting.

In case of official necessity, the repair engineer may be involved in the performance of his duties overtime, in the manner prescribed by the provisions federal legislation about work.

3. Rights

The repair engineer has the right:

3.1. Give instructions and tasks to his subordinate employees and services on a range of issues included in his functional responsibilities.

3.2. Monitor the implementation of production tasks, timely completion of individual orders and tasks by the services subordinate to him.

3.3. Request and receive necessary materials and documents related to the activities of the repair engineer, his subordinate services and departments.

3.4. Interact with other enterprises, organizations and institutions on production and other issues within the competence of the repair engineer.

3.5. Sign and endorse documents within your competence.

3.6. Submit proposals on the appointment, relocation and dismissal of employees of subordinate departments for consideration by the head of the Company; proposals to encourage them or to impose penalties on them.

3.7. Exercise other rights established Labor Code RF and others legislative acts RF.

4. Responsibility and performance evaluation

4.1. The repair engineer bears administrative, disciplinary and material (and in some cases provided for by the legislation of the Russian Federation, criminal) responsibility for:

4.1.1. Failure to carry out or improperly carry out official instructions from the immediate supervisor.

4.1.2. Failure or improper performance of your labor functions and the tasks assigned to him.

4.1.3. Illegal use of granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work assigned to him.

4.1.5. Failure to take measures to suppress identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to ensure compliance with labor discipline.

4.2. The evaluation of the repair engineer’s work is carried out:

4.2.1. By the immediate supervisor - regularly, in the course of the employee’s daily performance of his labor functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on documented results of work for the evaluation period.

4.3. The main criterion for assessing the work of a repair engineer is the quality, completeness and timeliness of his performance of the tasks provided for in these instructions.

5. Working conditions

5.1. The work schedule of a repair engineer is determined in accordance with the internal labor regulations established by the Company.

6. Signature right

6.1. To ensure his activities, the repair engineer is given the right to sign organizational and administrative documents on issues within his competence by this job description.

I have read the instructions ___________/___________/ “____” _______ 20__

JOB DESCRIPTION

repair engineer

1. GENERAL PROVISIONS

1.1. This job description defines the functional responsibilities, rights and responsibilities of a repair engineer (hereinafter referred to as the “engineer”) _______________ (hereinafter referred to as the “Organization”).

1.2. An engineer is appointed to a position and dismissed from a position in the manner established by current labor legislation by order of the head of the Organization.

1.3. The engineer reports directly to ________________.

1.4. A person with the following qualifications is appointed to the position of engineer:

Repair engineer of category I: higher professional (technical) education and work experience as a repair engineer of category II for at least 3 years.

Repair engineer category II: higher professional (technical) education and work experience as a repair engineer or other engineering positions filled by specialists with higher professional education for at least 3 years.

Repair engineer: higher vocational (technical) education without requirements for work experience or secondary vocational (technical) education and work experience as a category I technician for at least 3 years or other positions filled by specialists with secondary vocational education for at least 5 years .

1.5. The engineer must know:

Resolutions, orders, orders, methodological and regulatory materials on the maintenance and repair of equipment, prospects for the technical development of the Organization;

Organization of repair work and maintenance of equipment;

A unified system of scheduled preventive maintenance and rational operation of process equipment;

Technical characteristics, design features, purpose and operating modes of the Organization’s equipment, rules for its technical operation;

Methods for planning repair work;

Basic technological processes of production of the Organization's products;

Advanced repair systems and repair technology;

The procedure for drawing up estimates for repairs, requests for equipment, materials, spare parts, tools, etc.;

Fundamentals of economics, organization of production, labor and management;

Fundamentals of labor legislation;

Labor protection rules and regulations.

1.6. In his activities, the engineer is guided by:

Regulatory acts and methodological materials on the work performed;

Internal labor regulations;

Orders and instructions of the head of the Organization and the immediate supervisor;

This job description;

Rules on labor protection, industrial sanitation and fire protection.

1.7. During the temporary absence of an engineer, his duties are assigned to ___________________.

2. FUNCTIONAL RESPONSIBILITIES

The engineer performs the following duties:

Carries out the development of long-term and current plans (schedules) for various types of repairs of equipment and other fixed assets of the Organization (buildings, water supply systems, sewerage systems, air ducts, etc.), as well as measures to improve their operation and maintenance, monitors the implementation of approved plans (schedules) ).

Promotes the implementation of comprehensive regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the Organization, progressive repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.

Participates in checking the technical condition of equipment, the quality of repair work, as well as in the acceptance of newly received equipment, and, if necessary, draws up documentation for its decommissioning or transfer to other enterprises.

Organizes the preparation of repair work, determines the need for spare parts for equipment repair, and provides them to the Organization on the terms of cooperation.

Monitors the activities of the Organization’s divisions involved in carrying out repair work and testing of equipment, and monitors compliance with the rules of operation, maintenance and supervision of it.

Develops measures aimed at improving the organization of maintenance and repair of equipment, reducing the labor intensity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).

Participates in planning the technical development of production, major repairs and modernization of fixed assets, drawing up a balance of production capacities and their use.

Develops regulatory materials for preventive maintenance and repair of equipment (standards for repair and operating costs, service life of spare parts, range of replaceable and wearing parts, norms and limits for lubricant consumption).

Analyzes the causes of increased wear, accidents and equipment downtime and participates in the investigation of their causes, as well as the causes of industrial injuries, and takes measures to prevent them.

Monitors compliance with established deadlines for drawing up lists of defects and requests for repairs.

Draws up requests and specifications for spare parts, materials, tools, monitors the correct use of them.

Prepares materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed assets (industrial-production and non-industrial) assets, and monitors the expenditure of funds for these purposes.

Takes part in work related to the development and implementation of standards and technical specifications for the operation, maintenance and repair of equipment.

Gives opinions on rationalization proposals and inventions, on improving the design of equipment, organizing repair work and maintenance of equipment, provides practical assistance to innovators and inventors and organizes the implementation of accepted proposals.

Summarizes and disseminates best practices in organizing the repair and operation of equipment.

Keeps records and certification of equipment, buildings, structures and other fixed assets of the Organization, makes changes to the passports after their repair, modernization and reconstruction, draws up the necessary technical documentation and maintains established reporting.

3. RIGHTS

The engineer has the right:

3.1. Require the Organization's management to provide assistance in the performance of their duties.

3.2. Improve your skills.

3.3. Get acquainted with draft decisions of the Organization’s management relating to its activities.

3.4. Submit proposals on issues related to your activities for consideration by your immediate supervisor.

3.5. Receive from the Organization’s employees the information necessary to carry out their activities.

4. RESPONSIBILITY

The engineer is responsible for:

4.1. For failure to perform or improper performance of their duties provided for in this job description - in accordance with current labor legislation.

4.2. For offenses committed during the period of its activities - in accordance with current civil, administrative and criminal legislation.

4.3. For causing material damage - in accordance with current legislation.

5. WORKING CONDITIONS

5.1. The engineer’s work schedule is determined in accordance with the internal labor regulations established in the Organization.

5.2. Due to production needs, the engineer is required to travel to business trips(including local significance).

6. RIGHT OF SIGNATURE

6.1. To ensure his activities, the engineer is given the right to sign information and reference materials and documents on issues included in his functional responsibilities.

_____________________________ _____________ ____________________ (position of the person who compiled (signature) (full name) instructions)

"___"__________ ___ G.

AGREED:

Legal adviser ____________ ___________________ (signature) (full name)

"___"__________ ___ G.

I have read the instructions: ____________ ____________________ (signature) (full name)

I approve

_____________________________ (Last name, initials)

(name of organization, its ________________________________

organizational and legal form) (director; other person authorized

approve job description)

JOB DESCRIPTIONREPAIR ENGINEER

——————————————————————-

(name of institution)

00.00.201_g. №00

1. I. General provisions

1.1. This job description establishes the rights, responsibilities and job responsibilities of a repair engineer _____________________ (hereinafter referred to as the “enterprise”). Name of institution

1.2. A repair engineer is classified as a specialist.

1.3. A person who has a higher professional (technical) education, without presenting requirements for work experience, or a secondary vocational (technical) education and work experience as a category I technician of at least _______ years or other positions filled by specialists with secondary vocational education, at least _______ years.

A person who has a higher professional (technical) education and work experience as a repair engineer or other engineering positions filled by specialists with higher professional education for at least ________ years is appointed to the position of category II repair engineer.

A person who has a higher professional (technical) education and work experience as a repair engineer of category II for at least _______ years is appointed to the position of repair engineer of category I

1.4. A repair engineer is appointed to the position and dismissed from it on the basis of an order from the head of the enterprise upon the recommendation of __________________________________________________________.

1.5. The repair engineer reports directly to ____________________.

1.6. The repair engineer must know:

— organization of repair work and equipment maintenance;

— methods for planning repair work, — advanced repair systems and technology for repair work;

— prospects for the technical development of the enterprise,

— unified system rational operation of technological equipment and scheduled repairs;

— the procedure for drawing up estimates for repairs, requests for equipment, materials, spare parts, tools, etc.;

— technical characteristics, design features, purpose and operating modes of the enterprise equipment, rules for its technical operation;

— regulatory and methodological materials on maintenance and repair

equipment (orders, instructions, resolutions, etc.);

The main processes of production of the enterprise's products;

— rules and regulations of labor protection;

— basics of labor legislation;

— fundamentals of economics, organization of production, labor and management.

1.7. If the repair engineer is absent (vacation, illness, etc.), his duties are temporarily performed by a person appointed in the prescribed manner. This person acquires the corresponding rights and is responsible for the proper performance of the duties assigned to him.

1. II. Job responsibilities

The repair engineer must:

2.1. Participate in checking the technical condition of equipment, the quality of repair work, as well as in the acceptance of equipment newly arriving at the enterprise, and, if necessary, draw up documentation for its decommissioning or transfer to other enterprises.

2.2. Monitor the activities of enterprise departments involved in repair work and testing of equipment, compliance with the rules of operation, maintenance and supervision of it.

2.3. To promote the implementation of comprehensive regulated maintenance systems that ensure timely adjustment and repair of equipment, efficient operation of the enterprise, progressive repair technology, highly efficient repair devices, and mechanization of labor-intensive processes.

2.4. Develop promising and current plans(schedules) of various types of equipment repairs and other fixed assets of the enterprise (buildings, water supply systems, sewerage systems, air ducts, etc.), as well as measures to improve their operation and maintenance.

2.5. Monitor the implementation of approved plans (schedules).

2.6. Organizes the preparation of repair work, determines the need for

spare parts for equipment repair, to provide the enterprise with them

on terms of cooperation.

2.7. Draw up requests and specifications for spare parts, materials, tools, monitor the correct use of them.

2.8. Prepare materials for concluding contracts with manufacturers for the supply of spare parts and equipment, as well as with specialized contractors for the overhaul of fixed assets (industrial-production and non-production) assets, and monitor the expenditure of funds for these purposes.

2.9. Participate in work related to the development and implementation of standards and technical specifications for the operation, maintenance and repair of equipment.

2.10. Develop measures aimed at improving the organization of maintenance and repair of equipment, reducing the labor intensity and cost of repair work, improving their quality, increasing the efficiency of using fixed assets (increasing wear resistance and reducing equipment downtime).

2.11. Keep records and certification of equipment, buildings, structures and other fixed assets of the enterprise, make changes to the passports after their repair, modernization and reconstruction, draw up the necessary technical documentation and maintain established reporting.

2.12. Give opinions on rationalization proposals and inventions, on improving the design of equipment, organizing repair work and maintenance of equipment.

2.13. Provide practical assistance to innovators and inventors

organize the implementation of accepted proposals.

2.14. Participate in planning the technical development of production, major repairs and modernization of fixed assets, drawing up a balance of production capacities and their use.

2.15. Analyze the causes of increased wear, accidents and equipment downtime and participate in the investigation of their causes, as well as the causes of industrial injuries, and take measures to prevent them.

2.16. Develop regulatory materials for preventive maintenance and repair of equipment (standards for repair and operating costs, service life of spare parts, range of replaceable and wearing parts, norms and limits for lubricant consumption).

2.17. Monitor compliance with established deadlines for drawing up lists of defects and requests for repairs.

2.18. Carry out individual official assignments from your immediate supervisor.

2.19.Summarize and disseminate best practices in organizing repairs and

equipment operation.

III. Rights

The repair engineer has the right:

3.1. Inform your immediate supervisor about all shortcomings in the production activities of the enterprise (its structural divisions) identified during the performance of your official duties and make proposals for their elimination.

3.2. Involve specialists from all (individual) structural divisions of the enterprise in solving the tasks assigned to it (if this is provided for by the regulations on structural divisions, if not, with the permission of the head of the enterprise).

3.3. Contact management with requests for assistance in the performance of their official duties and rights.

3.4. Get acquainted with the draft decisions of the enterprise management concerning its activities.

3.5. Request personally or on behalf of the immediate supervisor from heads of departments of the enterprise and specialists information and documents necessary to perform their job duties.

3.6. Submit proposals for management's consideration

improvement of work related to the responsibilities provided for

this instruction.

1. IV. Responsibility

The repair engineer is responsible for:

- in case of causing material damage, within the limits determined by the criminal, civil, and labor legislation of the Russian Federation.

- in case of committing an offense in the course of carrying out its activities, within the limits determined by the criminal, civil, administrative legislation of the Russian Federation.

- in case of failure to fulfill or improper performance of their official duties, which are provided for by this job description, within the limits determined by the labor legislation of the Russian Federation.

Head of structural
divisions:

(signature) surname, initials

00.00.00
(signature) surname, initials

00.00.00
(signature) surname, initials

I have read the instructions:

00.00.00
(signature) surname, initials

And who can count on a salary increase Mark Bershidsky According to a December study by Hays, in next year 46% of employers plan to increase their staff. 45% say that they do not plan to increase their staff, but will only deal with...

home » Loans » Repair, design, furniture, construction, instructions. Sample job description of a service engineer for the repair of special equipment Job description of an engineer for planning repairs